Blu-ray player: How to connect the player to a TV?

Last Update date : 2017.10.20

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

 

●   Do not connect the power cord to the wall outlet until you have made all the other connections.

 

●   When you change the connections, turn off all devices before you start.

 

1 

 

 

Note: Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

 

●    When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

 

●    A long HDMI cable may cause screen noise, if this occurs, set HDMI Deep Colour to Off in the menu.

 

●    To view video in the HDMI 720p, 1080i or 1080p output mode, you must use a High speed (category 2) HDMI cable.

 

●    HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

 

If you have additional questions or require further assistance, please contact Samsung Customer Care using one of the options below.

Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Need Service? Service Center Locations

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.

ok