Guide on connecting Blu-ray player to TV and Audio System

Last Update date : 2017.10.20

Connecting to a TV

 

 

Step 1:  The connection of this product sends only signals of TV. Please connect the HDMI cable to watch output from their product.

 

Step 2:  If you use an HDMI-to-DVI cable to connect to their display device, connect the Digital Audio Out on the product to audio system to hear audio.

 

Step 3:  The HDMI output resolution is automatically set to the highest.

 

Step 4:   A long HDMI cable may cause a screen noise. If this occurs, set HDMI Deep Colour to OFF in the menu.

 

Step 5:  If the unit is connected to the TV in the HDMI 720p, 1080i, or 1080p output, use a High speed (category 2) HDMI cable.

 

Step 6:   Do not connect the power cord until you had made all the other connections.

 

Connecting to an AV receiver with Optical input

  

Step 1:  After connecting, press the input selector of the connected audio system and TV until the video signal appears on the TV and you hear the audio signal through the audio system.

 

Step 2:  Do not connect the power cord until you had made all the other connections.

 

Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Need Service? Service Center Locations

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.

ok