Checking the firmware version of your Home Theatre System

Last Update date : 2017.06.08

To check the Firmware version of your Blu-ray Home Theatre System:

  

Step 1: Turn on the Home Theatre System and wait for the Home menu to display.

 

Step 2: Using the left or right arrow buttons, go to Settings then press Enter.

 

bd hts settings 

 

Step 3: Using the up and down buttons, go to Support and then press Enter.

 

Step 4: Software Upgrade is automatically highlighted, press Enter.

 

bd hts sw update 

 

Step 5: Under Software Upgrade, By Online is automatically highlighted. The Firmware version appears on the right hand side under Current Version. For instance, the version as shown in the image below is 001053.

 

sw current version 

 

Note:

● To check for updates select By Online and press enter. The Home Theatre System will look for a newer version of firmware. Follow the on-screen prompts to update your system.


● If By Downloaded is available (not grayed out) a new firmware version has already been downloaded but has not been installed. Select By Downloaded, and then press enter. Follow the on-screen prompts to update your system.

 

Note: You can download the latest firmware from the Samsung website, or click here. (On the Support page, enter the product's model number into the search field then click the Search button. Go to Downloads tab then look for Firmware heading on the page.)

Need Service? Service Center Locations

Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.

ok