What is the 'Delay feature' and how do I use it?

Last Update date : 2017.09.11

Delay feature on Samsung dishwashers automatically starts the cleaning cycle at a later time. The delay start time can be adjusted from 1 hour to 24 hours.

 

Note: Depending on the model of your dishwasher the button positions may be different, however, the following instructions are still the same.

 

To set up a delay:

 

Step 1: Select the desired Cycle and Options for the load.

 

Step 2: Press the Delay Start button.

 

Step 3: To increase the delay start time, press or hold the Delay Start button until the desired time is reached.

 

-   

 

 

Step 4: The Delay indicator and the display will flash. 

 

 - 

 

Step 5: Press the Start/Cancel button to begin counting down the delay time.

 

Step 6: The cycle automatically starts as soon as the time expires.

 

 

To cancel a delay:

 

Press the Delay button during the count-down process.

 

To cancel a delay and a cycle: Press Start/Cancel once to drain and turn off the dishwasher or press Start/Cancel twice to turn dishwasher off without draining.

 

If you have tried all the instructions above and the issue still persists then please contact Samsung Customer Care using one of the options below. 

Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Need Service? Service Center Locations

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.

ok