Mini Micro Audio System: Are there any specific requirements needed to use USB Host for the MM-E460?

Last Update date : 2017.06.22

The following specifications are required to be met when using USB host on the MM-E460:

 

USB Host Specification


● Supports USB 1.1 or USB 2.0 compliant devices.
● Supports devices connected using the USB A type cable.
● Supports UMS (USB Mass Storage Device) V1.0 compliant devices.
● Supports the device of which the connected drive is formatted in the FAT (FAT, FAT16, FAT32) file system.

 

Operational Limitations


● A device supporting USB 1.1 alone may cause a difference in the picture quality, depending on the device.
USB Devices that can be used with the product

 

● USB Storage Device, MP3 Player


● Removable HDD


● Removable HDDs equipped with less than 160 Gigabytes are supported. Removable HDDs equipped with 160Gbytes or more may not be recognized, depending on the device.


● If the connected device does not work due to insufficient power supply, you can use a separate power cable to supply power so that it can work properly. The connector of the USB cable may differ, depending on the manufacturer of the USB device.


● USB card Reader: One slot USB card reader and Multi slot USB card reader.


● The USB card reader may not be supported, depending on the manufacturer.

 

● If you install multiple memory devices into a multi card reader, you may experience problems.

 

If you have additional questions or require further assistance, please contact Samsung Customer Care using one of the options below.

Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Need Service? Service Center Locations

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.

ok