Disk Manager
Some old BIOSs have a capacity barrier and does not recognize the high capacity HDD. In that case, the Disk Manager will solve the capacity barrier.
Note
We are now preparing a user guide for new DM version.Below pictures will be replaced when the new guide is completed.
Reference
If you click the "DM Creator.zip", you will get the DM_Creator.zip(For HDD)
DM_Creator.zip(For CD ROM Drive)For creating the Disk Manager install disk
- Download the DM_Creator.zip to somewhere on your hard drive
- Extract it. You can see the DM_Creator.exe.
- Prepare an empty 3.5" floppy diskette and inset it into your FDD.
- Execute the DM_Creator.exe. (Then, Disk Manager install disk will be created.)
Precaution
- For CMOS setup with hard drive, select Auto Detect or type parameters as Cyl : 1024 / Hd : 16 / Sec : 63
- If the parameter is set up as 'None', Disk Manager can not be installed.
- If you have 32GB barrier, you must use the 'Limit Capacity to 32GB' jumper setting.
Executing
- After installing hardware(Jumpers, Cables)
- Insert and boot from the Disk Manager install diskette
- Then you can see following screen
- This is nomar sequence of installing Disk Manager
- Press Next if you agree.
- Then, Below windows will appear.
- Press Yes if you want to.
- It's possible to skip below step if you have only one drive
- Select one drive you want to and press Next.
- You must choose one from below list
- If you want to use the Windows XP, select the Windows 2000.
- Select the OS and press Next.
- Please confirm your selections.
- Press Next if they are correct.
- A message of completion.
- If DDO is damaged, you can boot from DDO diskette.
- Press Next if you done or skip.
- The end of all steps.
- Remove the diskette and press Ctrl-Alt-Del to reboot.
