| NAND |
channel modeling guide for Toggle DDR 2.0 Illustrates the board design guidelines with respect to channel modeling, for high speed Toggle DDR 2.0 interface. |
| Mobile DRAM |
Memory channel topology and recommended trace lengths Provides guidance on how circuit simulation can be used to determine the maximum allowable trace lengths to avoid signal integrity problems. |
| Mobile DRAM |
Board desing guide for mobile set using LPDDR2 SDRAM A board design guideline that is essential for increasing the performance of a mobile device that uses Samsung LPDDR2 (Low Power Double Data Rate2) mounted onto the PCB (Printed Circuit Board). |
| Mobile DRAM |
Board desing guide for mobile set using LPDDR3 SDRAM A board design guideline that is essential for increasing the performance of a mobile device that uses Samsung LPDDR3 (Low Power Double Data Rate3) mounted onto the PCB (Printed Circuit Board). |
| MCP |
Board desing guide for mobile set using Samsung memory solution Provides guidance to board designers on how to improve mobile device performance. It includes useful technical skills to enable high performance systems to be designed |
| eMMC |
Board design guide for Mobile Set using eMMC 4.4x/ 4.5 A board design guieline that is essential for increasing the performance of a mobile device that uses Samsung eMMC 4.4x/ 4.5 (Embedded Mulimedia Card v4.4x/ v4.5) mounted onto the PCB (Printed Circuit Board). |
| MCP |
Low-cost board design guide for mobile set using LPDDR1_eMCP  Designing memory subsystem cost-effectively will be very important in budgeting mobile sets. This literature provides an exemplary design and guide for memory subsystem adopting LPDDR2-based eMCP, which integrates LPDDR2 DRAMs and eMMC in a single package for area reduction. The design example used only 3 layers with a 3-mil design-ruled PCB supporting 1066Mbps LPDDR2 I/O operation. |
