How can I set the initial setting and reset?

Last Update date : 2012.01.09


When you buy a TV or If you want to change the initial setting, You can use Plug & Play Feature to set initial setting. Please refer to the below steps.

1. Press the POWER button on the remote control. The message “Menu Language, Store Demo, Channels and Time will be set.” is displayed.

2. Press the ENTER button, then “Select language of the OSD.” menu is automatically displayed. Press the ENTER button.

3. Press the ▲ or ▼ button to select language, then press the ENTER button. The message “Select ‘Home Use’ when installing this TV in your home.” is displayed.

4. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then press the ENTER button. The message “Select the Antenna source to memorize.” is displayed.


    We recommend setting the TV to “Home Use” mode for the best picture in your home environment. “Store Demo” mode is only intended for use in retail environments.


    If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

5. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTER button to select “Start”.

    • Air: “Air” antenna signal.

    • Cable: “Cable” antenna signal.

    • Auto: “Air” and “Cable” antenna signals.


    In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲,▼,◄ or ► button, then press the ENTER button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

6. The TV will begin memorizing all of the available channels. To stop the search before it has finished, press the ENTER button with “Stop” selected.

7. After all the available channels are stored, it starts to remove scrambled channels And then, the Auto program menu reappears. Press the ENTER button when channel memorization is complete. The message “Set the Clock Mode.” is displayed.

8. Press the ENTER button. Press the ▲ or ▼ button to select “Auto”, then Press the ENTER button. The message “Set to daylight saving time.” is displayed. If you select “Manual”, “Set current date and time” is displayed.

9. Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER button. The message “Select the time zone in which you live.” is displayed.

10. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER button. If you have received a digital signal, the time will be set automatically.

11. The message “Enjoy your watching.” is displayed. When you have finished, press the ENTER button.

If you want to reset this setting, please follow the below.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2. Press the ENTER button again to select “Plug & Play” for further details on setting up options.


    The “Plug & Play” feature is only available in the TV mode.


Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

How would you like to contact us for support?

Samsung has launched Carry-in Online Appointment Service to save your time on making appointments for repair, maintenance and firmware upgrade!  Experience Now!

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the website.