How to connect the speakers

Last Update date :2017.04.19

Speaker Cable Connections

 

1.Match each speaker cable bundle to the correct speaker by matching the coloured band on each bundle

to the coloured sticker on the bottom or back of each speaker.

2. Connect the speaker wire plugs from each speaker to the back of the product by matching the coloured

band on each cable to the colours of the speaker jacks. When connecting, make sure to match label

colour on the back of speaker.

 

Connection

 

If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.

 

Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference.

If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other device near the product, sound from the speakers may be disrupted because of interference.

 

The maximum transmission distance from the product to the wireless receiver module is about 10m, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio waves cannot penetrate metal.

If the product doesn't make a wireless connection, you need to run an ID Set between the product and

wireless receiver module. With the product turned off, press and hold (MUTE) button on the remote

control for 5 seconds. Turn on the wireless receiver module. Then, press and hold the "ID SET" button on

the back of the wireless receiver module for 5 seconds, and then turn the product on.

 

Related Model Information

HT-Z320T/MEA

Contents Satisfaction Survey