Drain water manually if pump is blocked

Last Update date : 2017.03.01


* Please note, this section is designed to give you basic product troubleshooting information, also refer to your user manual for more information. 



Front Loader : How to drain water out manually.

To drain your washer manually, follow these steps:
1. Unplug the washing machine from the power supply.
2. Open the filter-cover.

3. Unscrew the emergency drain cap by turning it to the left.
4. Grip the cap on the end of the emergency drain tube, and then slowly pull it out about 15 cm (about 6 inches).

5. Allow all the water to flow into a bowl.
6. Reinsert the drain tube and then screw the cap back on.
7. Replace the filter-cover.



** "To aid us in creating better support content for you, kindly complete the survey below if your query was resolved. Your rating and comments should only be based on the above content.

For all other queries or further technical assistance, please call Samsung Customer Care on 0800 726 786 or Live Chat with our Technical Team online, services are open 24 hours, 7 days."


Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Need Service? Service Center Locations

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.