Why Is The Laundry Still Soaking Wet At The End Of A Cycle?

Last Update date : 2017.10.24


* Please note, this section is designed to give you basic product troubleshooting information, also refer to your user manual for more information. 



Front Loader : Why Is The Laundry Still Soaking Wet At The End Of A Cycle?

If laundry is too wet at the end of a cycle:

• Use the High or Extra High spin speed.
• Use high efficiency detergent to reduce over-sudding.
• Verify that the washer is level. If the washer is not levelled properly, it attempts to spin up to a high speed, but it senses a severe unbalance condition and stops. The washer will rotate back and forth a few times to try and reposition the load, and then it attempts to spin up again. If the washer cannot detect a balanced load, it will attempt to reposition the load 3 times. After the 3rd time, it will add water and attempt to spin again. If the washer still cannot detect a balanced load, the washer will stop and the clothes will be wet.

If you find that your machine will not spin, Please contact Samsung for further assistance as per the information below.

• Model Info.




** "To aid us in creating better support content for you, kindly complete the survey below if your query was resolved. Your rating and comments should only be based on the above content.

For all other queries or further technical assistance, please call Samsung Customer Care on 0800 726 786 or Live Chat with our Technical Team online, services are open 24 hours, 7 days." 


Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Need Service? Service Center Locations

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.