How To Clean Surface Stains From The Shiny Metallic Finish On The Washer / Dryer Door?

Last Update date : 2016.06.30

The surface staining shown in the picture below is usually caused by water. Using a mild detergent and a damp cloth will not always remove the spots. If you have tried using a mild detergent and a damp cloth and are having problems with these types of surface stains, Samsung recommends using a small amount of Ceramabryte™ cooktop cleaner.

 

Cleaning Surface Stains

 

Clean and dry the affected area immediately. Any residual cleaner or water that is not removed will result in more stains.

 

Sample photo:

 

1 

 

 

To remove surface stains from the metallic finish on the door, follow the steps below:

 

1. Dispense a small amount of Ceramabryte™ onto a clean, damp, non-abrasive, cloth.

 

2 


2. Clean the affected area by gently scrubbing in a repeating circular motion.
3. When finished scrubbing, use a clean, damp, lint-free, non-abrasive, cloth to clean off the area.                 

4. And then, immediately after, use a clean, dry, lint-free, non-abrasive, cloth to dry the area.

 

                    Result:

 

3 

 

Contents Satisfaction Survey

Q1. Is this content helpful?

Q2. How satisfied were you with this content?

Q3. Tell us what you think. What could we have done to answer your question better?

Need Service? Service Center Locations

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.

ok