Television


InfoLive

You are here : Home : Television / Audio & Video : Television : SAMSUNG Media Solution : InfoLive

SAMSUNG Media Solution

Downloading New Contents

  1. Connect your Ethernet cable to the LAN connector behind the TV set.
  2. User's Guide

  1. [Case 2] Connecting the TV through an Internet modem using an Ethernet cable
    ㆍ Connect your Ethernet cable between the LAN connector behind the TV set and the output connector of your external modem.
  2. User's Guide

  1. [Case 3] Using a wired Internet switch with direct LAN connection
    Two separate LAN cables are required to use a PC and the InfoLive™ service at the same time.
    Connect your Ethernet cable to the LAN connector of your network switch (IP Sharer).
    To connect to InfoLive™, connect a LAN cable between another LAN connector of your network switch
    and the LAN connector behind the TV set.
    To connect your PC to the Internet, connect a LAN cable between another LAN connector of your network switch and your PC’s LAN card.
  2. User's Guide

  1. [Case 4] Connecting through a wired network switch and Internet modem
    Two separate LAN cables are required to use a PC and the InfoLive™ service at the same time.
    Connect an LAN cable between the Output connector of your modem and the LAN connector of your network switch (IP Sharer).
    To connect to InfoLive™, connect a LAN cable between another LAN connector of your network switch and the LAN
      connector behind the TV set.
    ㆍ To connect your PC to the Internet, connect a LAN cable between another LAN connector of your network switch and your PC’s LAN card.
  2. User's Guide

  1. [Case 5] Using a wireless network switch with direct Ethernet connection
    One LAN cable is required to use a PC and the InfoLive™ service at the same time.
    Connect your Ethernet cable to the LAN connector of your network switch.
    To connect to InfoLive™, connect the wireless LAN adapter for InfoLive™ to the WiseLink™ connector (USB connector)
    of the TV side panel.
    ㆍ To connect your PC to the Internet, connect a LAN cable between another LAN connector of your network switch and your PC’s LAN card.
  2. User's Guide

  1. [Case 6] Connecting through a wireless network switch and Internet modem
    One LAN cable is required to use a PC and the InfoLive™ service at the same time.
    Connect a LAN cable between the output connector of your external modem and the LAN connector of your network switch (IP Sharer).
    ㆍ To connect to InfoLive™, connect the wireless LAN adapter for InfoLive™ to the WiseLink™ connector (USB connector)
    of the TV side panel.

    ㆍ To connect your PC to the Internet, connect a LAN cable between another LAN connector of your network switch and your PC’s LAN card.
  2. User's Guide

  1. [Case 7] If a username and password are required by the Internet provider
    ㆍ None of the previous connection methods can be used if an ID and password are required by your ISP.
    ㆍ Connect a wired/wireless network switch to the LAN connection provided by your ISP.
    Connect a desktop PC or a laptop to the network switch and connect to the network by entering your username and password.
    ㆍ If using a wired LAN, connect an Ethernet cable between your switch and the LAN connector behind your TV. If using a wireless LAN,
     connect the wireless LAN adapter for InfoLive™ to the WiseLink™ adapter (USB connector) of the TV side panel.
  2. User's Guide
Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select [Network selection] and press the [OK] button of the remote control.
  4. 4. Depending on your connection type, select ‘Cable’ or ‘Wireless’ from the menu and press the [OK] button of the remote control. Then press the
    [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select ‘Cable Network Setup’ and press the [OK] button of the remote control.
  4. 4. Choose ‘Internet Protocol Setup’ and press the [OK] button of the remote control.
  5. 5. Select ‘Auto Setup’ and press the [OK] button of the remote control. Then press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select ‘Cable Network Setup’ and press the [OK] button of the remote control.
  4. 4. Choose ‘Internet Protocol Setup’ and press the [OK] button of the remote control.
  5. 5. Select ‘Manual Setup’ and enter the IP address using the digit buttons of the remote control. Then press [OK] to save your settings.
  6. 6. Press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select ‘Wireless Network Setup’ and press the [OK] button of the remote control.
  4. 4. Choose ‘Internet Protocol Setup’ and press the [OK] button of the remote control.
  5. 5. Select ‘Auto Setup’ and press the [OK] button of the remote control. Then press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select ‘Wireless Network Setup’ and press the [OK] button of the remote control.
  4. 4. Choose ‘Internet Protocol Setup’ and press the [OK] button of the remote control.
  5. 5. Select ‘Manual Setup’ and enter the IP address using the digit buttons of the remote control. Then press [OK] to save your settings.
  6. 6. Press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. Choose ‘Access Point Select’ from the menu and press the [OK] button of the remote control.
  4. 4. Select your desired access point and press the [OK] button of the remote control.
  5. 5. When connection is established, the setting screen disappears. If the desired access point is not displayed, use the red button of the remote control to search for available access points.

User's Guide

Downloading New Contents
  1. 1. To check whether the network is properly configured, go to the ‘Setup’ -> ‘Cable Network Setup’ menu, and press the [OK] button of the remote control..
  2. 2. Select ‘Network Test’ and press the [OK] button of the remote control.
  3. 3. When the Network Test screen pops up, the required elements are tested and the status of the network currently configured is displayed.
  4. 4. If the network is properly configured (picture 2), press the [End] button to exit the menu and finish setup.

User's Guide

Downloading New Contents
  1. 1. To check whether the network is properly configured, go to the ‘Setup’ -> ‘Wireless Network Setup’ menu, and press the [OK] button of the remote control.
  2. 2. Select ‘Network Test’ and press the [OK] button of the remote control.
  3. 3. When the Network Test screen pops up, the required elements are tested and the status of the network currently configured is displayed.
  4. 4. If the network is properly configured (picture 2), press the [End] button to exit the menu and finish setup.

User's Guide

User's Guide

blank

recently viewed
No Item
Select All
Delete