Television

InfoLive

You are here : Home : TV / Audio Video : Television : SAMSUNG Media Solution : InfoLive

SAMSUNG Media Solution

Downloading New Contents

  1. Connect your Ethernet cable to the DATA / ETHERNET socket on the rear connection panel of the TV.
  2. User's Guide

  1. [Case 2] Connecting the TV through an Internet modem using an Ethernet cable
    - Connect your Ethernet cable between the DATA / ETHERNET socket on the rear connection panel behind the TV set and the Output socket of your External modem.
  2. User's Guide

  1. [Case 3] Using a wired Internet switch with direct DATA / ETHERNET connection
    - Two separate DATA / ETHERNET cables are required to use a PC and the InfoLive™ service at the same time..
    - Connect your Ethernet cable to the DATA / ETHERNET socket of your network switch (IP Sharer).
    - To connect to InfoLive™, connect a DATA / ETHERNET cable between another DATA / ETHERNET socket of your network switch and the DATA / ETHERNET socket on the rear connection panel behind the TV set.
    - To connect your PC to the Internet, connect a DATA / ETHERNET cable between another DATA / ETHERNET socket of your network switch and your PC’s DATA / ETHERNET card.
  2. User's Guide

  1. [Case 4] Connecting through a wired network switch and Internet modem
    - Two separate DATA / ETHERNET cables are required to use a PC and the InfoLive™ service at the same time.
    - Connect an DATA / ETHERNET cable between the Output socket of your modem and the DATA / ETHERNET socket of your network switch (IP Sharer).
    - To connect to InfoLive™, connect a DATA / ETHERNET cable between another DATA / ETHERNET socket of your network switch and the DATA / ETHERNET socket behind the TV set.
    - To connect your PC to the Internet, connect a DATA / ETHERNET cable between another DATA / ETHERNET socket of your network switch and your PC’s DATA / ETHERNET card.
  2. User's Guide

  1. [Case 5] Using a wireless network switch with direct Ethernet connection
    - One DATA / ETHERNET cable is required to use a PC and the InfoLive™ service at the same time.
    - Connect your Ethernet cable to the DATA / ETHERNET socket of your network switch.
    - To connect to InfoLive™, connect the wireless DATA / ETHERNET adapter / dongle for InfoLive™ to the WiseLink™ socket (USB socket) of the TV Side Panel.
    - To connect your PC to the Internet, connect a DATA / ETHERNET cable between another DATA / ETHERNET socket of your network switch and your PC’s DATA / ETHERNET card.
  2. User's Guide

  1. [Case 6] Connecting through a wireless network switch and Internet modem
    - One DATA / ETHERNET cable is required to use a PC and the InfoLive™ service at the same time.
    - Connect an DATA / ETHERNET cable between the Output socket of External modem and the DATA / ETHERNET socket of your network switch (IP Sharer).
    - To connect to InfoLive™, connect the wireless DATA / ETHERNET adapter / dongle for InfoLive™ to the WiseLink™ socket (USB socket) of the TV Side Panel.
    - To connect your PC to the Internet, connect a LAN cable between another LAN connector of your network switch and your PC’s LAN card.
  2. User's Guide

  1. [Case 7] When user name and password are required by Internet provider
    - It is impossible to use any of the previous connection methods when ID and password are required by your ISP.
    - Connect a wired/wireless network switch to the DATA / ETHERNET connection provided by your ISP.
    - Connect a desktop PC or a laptop to the network switch and connect to the network by entering your user name and password.
    - If using wired connection, connect a Ethernet cable between your switch and the DATA / ETHERNET socket on the rear connection panel at the back of your TV. If using wireless DATA / ETHERNET, connect the wireless DATA / ETHERNET adapter / dongle for InfoLive™ to the WiseLink™ adapter / dongle (USB socket) of the TV side Panel.
  2. User's Guide
Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select [Network selection] and press the [OK] button of the remote control.
  4. 4. Depending on your connection type, select ‘Cable’ or ‘Wireless’ from the menu and press the [OK] button of the remote control, then press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select ‘Cable Network Setup’ and press the [OK] button of the remote control.
  4. 4. Choose ‘Internet Protocol Setup’ and press the [OK] button of the remote control.
  5. 5. Select ‘Auto Setup’ and press the [OK] button of the remote control. Then press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select ‘Cable Network Setup’ and press the [OK] button of the remote control.
  4. 4. Choose ‘Internet Protocol Setup’ and press the [OK] button of the remote control.
  5. 5. Select ‘Manual Setup’ and enter the IP address using the digit buttons of the remote control. Then press [OK] to save your settings.
  6. 6. Press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select ‘Wireless Network Setup’ and press the [OK] button of the remote control.
  4. 4. Choose ‘Internet Protocol Setup’ and press the [OK] button of the remote control.
  5. 5. Select ‘Auto Setup’ and press the [OK] button of the remote control. Then press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. In the [Setup] menu, select ‘Wireless Network Setup’ and press the [OK] button of the remote control.
  4. 4. Choose ‘Internet Protocol Setup’ and press the [OK] button of the remote control.
  5. 5. Select ‘Manual Setup’ and enter the IP address using the digit buttons of the remote control. Then press [OK] to save your settings.
  6. 6. Press the [End] button to exit the menu.

User's Guide

Downloading New Contents
  1. 1. Turn on the TV and press the [Menu] button of the remote control.
  2. 2. In the menu, select [Setup] and press the [OK] button of the remote control.
  3. 3. Choose ‘Access Point Select’ from the menu and press the [OK] button of the remote control.
  4. 4. Select your desired access point and press the [OK] button of the remote control.
  5. 5. When connection is established, the setting screen disappears. If the desired access point is not displayed, use the red button of the remote control to search for available access points.

User's Guide

Downloading New Contents
  1. 1. To check whether the network is properly configured, go to the ‘Setup’ -> ‘Cable Network Setup’ menu, and press the [OK] button of the remote control..
  2. 2. Select ‘Network Test’ and press the [OK] button of the remote control.
  3. 3. When the Network Test screen pops up, the required elements are tested and the status of the network currently configured is displayed.
  4. 4. If the network is properly configured (picture 2), press the [End] button to exit the menu and finish setup.

User's Guide

Downloading New Contents
  1. 1. To check whether the network is properly configured, go to the ‘Setup’ -> ‘Wireless Network Setup’ menu, and press the [OK] button of the remote control.
  2. 2. Select ‘Network Test’ and press the [OK] button of the remote control.
  3. 3. When the Network Test screen pops up, the required elements are tested and the status of the network currently configured is displayed.
  4. 4. If the network is properly configured (picture 2), press the [End] button to exit the menu and finish setup.

User's Guide

User's Guide

blank