Too dark? Too blurry? Eyes that look like the devil's? These common problems can spoil a great picture. The good news is that by setting your camera correctly, you can avoid these vexing photography problems. Here are five easy ways to solve them.
When your camera’s flash bounces light off of your subject’s retina, the result is red eye. This problem is most troubling when the ambient lighting is dim, causing your subject’s pupils to open wide. The pupils can’t react quickly enough when your flash goes off, and the sudden, bright light makes the red-eye effect quite noticeable.
You can’t always shoot in perfect sunlight, and you usually can’t shoot at night without a flash. Fortunately, a camera like the Samsung WB250F gives you two ways to fix the issue. First, if you’re shooting with a flash, use the Red-eye reduction mode. This causes the camera to flash twice. The first flash causes the subject’s pupils to contract, so the red eye effect isn’t visible when the second flash goes off (and the picture is taken). If you forgot to turn on Red-eye mode, don’t worry. View your photo and select Red-eye Fix from the edit menu. The camera will automatically remove red-eye effects from the photo, letting you save the corrected image. Many popular photo-editing applications have a red-eye-removal feature as well, if you don’t mind doing a little post-production on your photos.
When shooting in a dusty environment—where tiny specks are floating in the air—your camera’s flash may reflect off of these particles, leaving translucent orbs hanging in the middle of your image.
This is a tricky one, but the best option is to turn off the camera’s flash. You might be surprised how well shots turn out indoors under available light in the room. Take a sample shot with the flash turned off and whatever interior lighting is available turned on. If your test images still come out dark, turn up the ISO setting one level at a time until the picture looks bright enough.
Blur is a ubiquitous problem in photography. Often it occurs when your subject moves as you’re shooting, or when the camera shakes while the shutter is open.
If you’re shooting a fast-moving subject and don’t want any motion in the shot, use a fast shutter speed. The best way to manipulate shutter speed is to use Shutter Priority mode on your camera, then simply choose a faster setting. For reducing blur on just about any shot, the Optical Image Stabilization feature on the WB250F will help by reducing the impact of camera shake. Turn on OIS from the Menu screen when in Shooting mode. Or you can end the shakes by using a tripod to support the camera.
Put your subject between your camera and a bright light source (like the sun) and you’ll end up with a dark photo, your subject awash in shadow. That’s called backlighting, and while it can yield an artsy effect, it can also ruin a more conventional shot.
Planning out your shot in advance is the best way to ensure that they don’t come out too dark. Never shoot toward the sun. Keeplight sources to the side or behind you. If you’ve rearranged your composition and shots still aren’t coming out bright enough, try one of these additional tips. A fill-in flash can help by brightening up dark parts of an image when shooting in otherwise bright conditions. Can’t shoot away from the light? Use the Auto Contrast Balance (ACB) option on the WB250F to help compensate. If all else fails, adjust the exposure or EV value manually from the Shooting mode menu. Each tick upward of the EV level will brighten the overall picture.
Look closely at a photo—especially a landscape with sky in the shot—and you’ll notice the picture is darker around the edges than in the center. This is a common problem called “vignetting,” caused because camera lenses admit more light through the center of the lens than on the periphery.
Vignetting is at its worst when shooting a wide-angle shot with a small aperture (or f-stop) value. The easiest solution is to increase the aperture setting, which lets less light through the camera lens. Using a slight zoom can also help to eliminate this problem by trimming off the edges of the shot.
Samsung is a registered trademark of Samsung Electronics Co., Ltd. All other brand, product, service names and logos are trademarks and/or registered trademarks of their respective owners.
Screen images simulated. Appearance and actual performance of device may vary. The above content is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use or reliance of the above content.