Generic CDMA: How Do I Pair My Generic CDMA SCH-I100 (Gem) Phone With A Bluetooth Device?
The SCH-I100 (Gem) is qualified as meeting Bluetooth 2.1 core specifications. These specifications follow a Simple Secure Pairing (SSP) model, allowing for quick and secure pairing. In order to pair the SCH-I100 (Gem) with another device, such as a headset, follow the steps below:
- Press the Home Key
- Press the Menu Key
- Tap on Settings
- Tap on Wireless and Network
- Tap on Bluetooth settings
- Tap on Bluetooth to turn on the radio
- Set the Bluetooth accessory to be discoverable per its operating instructions
- Tap Scan devices
- Tap on the desired device
- Tap Pair and connect
Note: The Bluetooth radio must be turned on inorder to scan for
nearby device.
If the 
icon is seen in the status bar, skip step 6.
Note: For Bluetooth headsets that do not have a dedicated power button, the most common way to place it in discover mode is by pressing and holding the "Action/Hold" button while in a power off state. The LED on the device may either turn solid blue or alternate colors to shows it is discoverable.
Note: With Bluetooth 2.1, it should not be necessary to input a four digit passkey to complete the pairing process. By following SSP, the six digit passkey exchange is done in the background since security is based upon proximity by having both devices in physical possession.
If you are prompted to enter a password for a headset, try 0000 or 1234.
Note: The device should show connected
To view the Generic CDMA SCH-I100 (Gem) Bluetooth Index, click here.
For more information on the Generic CDMA SCH-I100 (Gem) click here.