How do I Mount the Drying Rack?

    Drying foam rubber, plastic, or rubber with a heat setting may cause damage to he item and could lead to a fire. Use Air Fluff only.   

Mounting The Drying Rack

Items on the drying rack should NOT come in contact with the drum, since it will still be spinning.

To mount the drying rack, perform the following steps below:

  1. Open the door.
  2. Mount Drying Rack in tumbler by engaging the two rear tails into the two recessed areas in the back wall.
  3. Place the front tail of Drying Rack on top of the lint filter.
  4. Place items to dry on the rack, giving enough space between them to give more air contact.
  5. Close the door.
  6. Use Time Dry. Select time based on the conditions of items such as their water contents and fabric styles.
  7. Start the dryer. It may be necessary to reset the timer if a longer drying time is needed.



Washable sweaters (block to shape; lay flat on rack)

Heat (Low/Extra Low)

Stuffed toys (cotton or polyester fiber filled)

Heat (Low/Extra Low)

Stuffed toys (foam or rubber filled)

Air Fluff

Foam rubber pillows

Air Fluff


Fluff or Heat

Email a Friend