Product: Home Appliances > Washers & Dryers > Washers
If there is no water or not enough water in your washing machine, try the following:
Important: All 2010 models fill from the bottom up. You may not see the water going into the washer, this is normal. If your clothes are all wet, and clean at the end of the cycle, your washer is operating normally.
Your washer uses 12.68 gallons of water per cycle. It may not appear to have enough water on the initial fill, but this is normal. Your washer adds water after the initial fill to properly mix the detergent.
Please refer to the images below for proper water levels.
Initial fill level: