Washers: Washer Fills With The Wrong Temperature Water
your washing machine's water is cold when it's supposed
to be warm, or vice versa, check the following:
sure both faucets from the home's water source are turned on fully.
sure the temperature selection is correct.
sure the hoses are connected to the correct faucets.
Check their water heater. It should be set to deliver a
minimum 120° F (49° C) hot water at the tap.
check the water heater capacity and recovery rate. If you
have a small water heater and are using a lot of hot water (e.g., maybe
someone's taking a long, hot shower), the supply of hot water may be
depleted and need time to reheat.
Disconnect the water hoses and clean the inlet filter screens.
The hose filter screens may be plugged (see images below)
their washer fills, the water temperature may change as the automatic temperature
control feature checks incoming water temperature. This is normal.
the washer fills, you may notice just hot and/or just cold water going
through the dispenser when cold or warm wash temperatures are selected.
This is a normal function of the automatic temperature control feature.
We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.