SAMSUNG assumes no responsibility, and shall not be liable, in connection with whether any such products or services will be appropriate, functional or supported for the SAMSUNG products or services available in your country.
It appears that the same product is registered more than once in your account. Please select the registered model you would like to update below.
Need to update or add additional registration information?
Use Our Interactive Tool To Fix Common Problems.
Explore tips, articles, ideas, and more.
Your message has been sent.
Download data unavailable
Page of 22/2
A noise can sometimes be heard while the oven is preheating, being used, or cooling down. This is called oil canning. Oil canning is caused by expansion or contraction of the rear oven wall. This is a normal condition. When using LP gas, a popping sound may be heard when the burner shuts off.
Using the right cookware can prevent many problems, such as food taking longer to cook or achieving inconsistent results. Proper pans will reduce cooking times, use less energy, and cook food more evenly. Avoid using the following types of cookware on the smoothtop: Pans with grooved or warped
The cook tops on Samsung electric ranges have been internally tested to support loads of up to 70 pounds and run continuously at maximum heat levels for extended periods of time. Samsung does not guarantee fitness of the product for any specific purpose, however, it is our understanding that
The Consumer Electronics Show (CES) is taking place during January 6th - 10th in Las Vegas Nevada and is known as a global consumer electronics and consumer technology tradeshow that introduces new technology and reveals new products each year. Please see below for common questions. When will
The oven door is an assembly and is not vacuum sealed. Deposits may collect between the glass layers. The amount that collects depends upon the type of roasting and broiling being done. Vents on the oven door are required for air flow behind the glass. Do not use spray cleaners to clean the
To install a four wire power cord, perform the following steps: Remove the 3 lower terminal screws from the terminal block. Remove the ground screw and ground plate and retain them. Cut and discard the ground strap. DO NOT DISCARD ANY SCREWS. Insert the one ground screw into the power cord