How To Setup The SWA-4100 With Your Samsung Home Theater
This guide will advise you on how to connect and set up your SWA-4100 wireless module with your Samsung home theater system.
Why Does My Home Theater Read 'Protection' On The Display?
When the front display of your Home Theater System (HTS) displays the word PROTECTION, it indicates the Home Theater is over heating and will quickly shut down to prevent any damage. This can happen if the HTS is stacked along with other electronic devices or if the HTS is in an enclosed area
Why Does My Movie Have Black Bars Across The Top And Bottom Of The Screen?
Aspect ratio is the relationship between the width of a film image and its height. For example, films displayed in the 16:9 aspect ratio are 16 inches wide for every 9 inches they are tall which can also be expressed as 1.78:1. Standard TV’s have an aspect ratio of 4:3 or 1.33:1, Wide screen
Video & Playback
Yes, But One Of My DVD Discs Does Not Play.
Since your player is able to play all other DVD discs EXCEPT this one let's check the following to determine why this disc isn't playing: DVD Region: Verify the disc is a 'Region 1' disc. All Samsung Blu-ray players sold in the US support Region 1 DVD discs. Select 'Supported DVD Region
Yes, This Is The ONLY 3D Blu-ray Disc That Is Not Playing.
Since this is the only 3D Blu-ray disc not playing our next step is to check the Firmware version on your player and update if necessary. Is your player Firmware up to date? Before we continue we'll need to check the Firmware Version on your 3D BD AV receiver player, we will determine
No, None Of My 3D Blu-ray Discs Play.
Since none of your 3D Blu-ray movies are playing and you have confirmed the current disc has a 3D logo, your player may require a firmware upgrade for playback compatibility or may require service. To determine if your player requires service, insert a 2D Blu-ray disc into your player. If
Internet Service Test Fails
An Internet Service Test Failure can occur due to poor connectivity to a modem or a firewall could be interfering with the connection. If the Internet Service Test fails, follow the troubleshooting steps below to resolve the issue: Disable any firewall on the network that could be blocking
Internet Service Continues To Fail
While its nearly impossible to cover all the different router and modem models and settings, we can easily determine if the router, modem or their settings are causing the problem. To test your router, follow these steps: Power off your Home Theater if it is already on. Power off your
Setting Up The SWA-5000
Instructions for setting up rear wireless speakers using the SWA-5000 are: Connect the front left, front right, center, and subwoofer speakers to the back of the home theater system. With the home theater system off, the TX card into the TX Card connection (labeled WIRELESS) on the back