Specifications Download Spec Sheet
19" LCD Screen
The diagonal measurement of a TV screen or monitor, from corner to corner.
1280 x 1024
Fixed number of horizontal scan lines on a monitor. P (Progressive) means scan lines are drawn in sequence.
Dynamic Contrast Ratio
Difference in luminosity between brightest color (white) & darkest (black) over time. Higher ratio means more contrast.
Screen Size ?19" LCD Screen
The diagonal measurement of a TV screen or monitor, from corner to corner.Resolution ?1280 x 1024
Fixed number of horizontal scan lines on a monitor. P (Progressive) means scan lines are drawn in sequence.Dynamic Contrast Ratio ?1000:1 (Typical)
Difference in luminosity between brightest color (white) & darkest (black) over time. Higher ratio means more contrast.Viewing Angle (Horizontal/Vertical) ?160˚/160˚ (CR>5)
Degrees from side to side (and above to below) from which a screen can be viewed without loss of quality.Response Time ?5ms
Typical speed at which pixels can change color. Lower response times mean better motion image reproduction.Power
Max Stand By Power (DPMS) ?1 watts(DPMS mode)
Energy consumed by a monitor while off or in sleep mode, as per Display Power Management Signaling.Dimensions (W x H x D)
Product Dimensions With Stand ?16.4" x 16.6" x 7.9"
Width, height and depth of the monitor, including stand, as measured in inches (in.).Weight (lb.)
Product Weight With Stand ?See More +15 Lbs.
Weight of the monitor, as measured in pounds (lb.).Shipping Weight ?18.3 Lbs.
Weight of the monitor, including shipping container, as measured in pounds (lb.).
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
Register Your Product
Register now to get updates, faster tech support and more.Register your product
Manuals & Downloads
Upgrade guide (Firmware) ver.3.0 - Win XP/Vista/Windows 7 (EN, 1.01 MB) ?Feb 8, 2010update Guide for PCoIP firmware release3.0
Upgrade guide (Firmware) ver.3.0 - Win XP/Vista/Windows 7 (EN, 0.31 MB) ?Feb 3, 2010How to upgrade firmware
Upgrade guide (Firmware) ver.1.0 - Win XP/Vista/Windows 7 (EN, 3.78 MB) ?Feb 3, 2010TERA1 FIRMWARE RELEASE NOTES
Upgrade File (Firmware) ver.2.3-V233 - Win XP/Vista/Windows 7 (EN, 3.41 MB) ?Feb 2, 2010When you connect with Hostcard using PCoIP Protocol , Firmware version of server and Monitorshould be the same.if your server is not compatible with V250 firmware, you can use V233.Applicable monitor :930ND / NC190 / NC240
Upgrade File (Firmware) ver.3.0-V250 - Win XP/Vista/Windows 7 (EN, 3.48 MB) ?Feb 1, 2010
- Title How to use PCoIP Zero Clients with VMware view4(update for PCoIP firmware release3.0)
- Applicable Model 930ND / NC190 / NC240
- Carrier or Corporate Customer Teradichi firmware
- Description for update for PCoIP firmware release3.0 pls.find user guideFirmware Upload Process1.Ensure host PC or Workstation is in a idle state (all applications must be closed).2.Log into the host admin interface (using password if enabled)3.Select the Firmware Upload webpage Browse button to browse to the firmware.allfile, e.g. tera1x00_rel3-0_v250.all4.Select the File Upload window Open button5.Select the webpage Upload button6.Select the webpage OK button on the warning window that reads, Are you sure? This will upload a new firmware image. This operation may take a few minutes. 7.Wait for the firmware upload to complete. The following message appears when complete: Success Flash successfully programmed! You must reset the device for the changes to take effect.8.Select the Reset button.9.Select the OK button on the warning window that reads, The PCoIP processor will reset on the next host system restart; your changes will take effect then. Are you sure you want to proceed?10.Repeat steps 2 through 7 on the client, but do not restart the client. 11.Restart the Host PC or Workstation12.Reset the client13.Start PCoIP Session
VGA(Graphics) (Driver) ver.1.0 - Win 98/ME/2K/XP/X64/Vista (MULTI LANGUAGE, 0.06 MB) ?Feb 26, 2009If you have trouble for setting up the Monitor under Windows 98/Me/2000/XP/X64/Vista/Vista64, this program will help you to install Windows Monitor Driver. You can install the most suitable Windows driver for your monitor.System Requirements : Windows 98/Me/2000/XP/X64/Vista/Vista64