What Bluetooth Devices Can I Connect To My Plasma TV?
The Samsung Bluetooth adapter was designed to work with certain Bluetooth devices based on the model year of your Plasma TV. To see which Bluetooth devices your TV can pair with, see the chart below that matches the model year of you TV Important: If you are attempting to pair a Bluetooth
Missing QAM Channels
There has been an FCC rule change to Clear QAM broadcasts. Previously many cable subscribers were able to use the QAM tuner in their TVs* to tune in the clear QAM signals from their local cable provider. The FCC has made a change to the broadcasting of QAM and the encryption of QAM signals
3D Glasses Compatibility
Tip: The * are place holders for any numbers. For example: the SSG-2100 and SSG-2200 use the same line (SSG-2 for determining compatibility Glasses Model 2010 3D TVs 2011 3D TVs 2012 3D TVs SSG-2 Yes (See Chart Below) No No SSG-3 No Yes (See Chart Below)
Problems Connecting To Your Home Network
Click below on your network connection method.
What Is Needed For 3D Content: A 3D Capable TV A pair of Bluetooth 3D glasses for each person (sold separately at retailers that sell Samsung 3D TVs) A device capable of outputting 3D signals (typically a BluRay player with a 3D movie) Note: 2D Content (such as videogames, TV shows, and
TV Will Not Power On
When troubleshooting a no power situation with your TV the first this you want to check is the status of the standby light on the TV. The Standby light will appear in the lower right corner of the TV Standby Light Off Standby Light On Click below on the statement that
How To Take Your Tv Out Of "Demo Mode"
There are 2 ways to take your tv out of demo mode. Method 1 The first way is going to take you through a Plug n Play Turn on the TV. Change the source to the TV source. Press the MENU button on the Samsung Remote. [The Main Menu will appear] Use the Up or Down arrows to
Feature: How To Run a Self-Diagnosis On Your TV (2010 - 2012 Models)
How To Run a Self-Diagnosis on your TV (2010 - 2012 Models)
3D: How To Convert 2D Video To 3D On Your 3D Enabled TV (2010 - 2012 Models)
Instructions on converting a standard 2D video signal into a 3D video signal
Connect: How To Connect A Cable Line To Your TV And Have The TV Memorize Channels (2011 - 2012)
Connecting a coax cable line and memorize channels from you cable provider
Maintenance: How To Update Your Plasma Television's Firmware (Software) Through Your Home Internet Connection (2008 - 2012)
Updating Your Plasma TV's Firmware Via Your Home Network (2008 - 2012 Models)
Setup: How To Auto Program Your Plasma TV Channels From A Cable Signal (2011-2012)
How To Auto Program Your Plasma TV Channels From A Cable Signal (2011-2012)
Operation: How To Perform A Factory Reset On A 2012 Model Plasma (PN**E)
Instructions on how to return your 2012 TV back to factory defaults (PN**E)
Feature: How To Use Game Mode On Your Plasma TV (2011 - 2012 PNxxD - PNxxE)
A step-by-step guide on how to use the game mode feature.
Operation: How To Reset The Picture Or Audio Settings On My Plasma TV To The Factory Settings? (2011 -2012)
Instructions on how to reset the TV picture or audio setting back to defaults without reseting all TVs settings back to factory defaults
Display: How To Change The Aspect Ratio On Your Plasma TV (2011 - 2012 PN**D ~ PN**E)
Instructions on how to adjust the aspect ration on your 2011~2012 plasma TV
Feature: How To Use Signal Pattern And Side Gray Options On Your Plasma TV (2011 - 2012 PNxxD - PNxxE)
Steps on how to use the Screen Burn reduction features Signal Pattern and Side Gray.
Operation: How To Check The Software / Firmware Version On Your Plasma TV (2011 - 2012)
Instructions on how to check the softfware / firmware version currently on your TV (PNxxD ~ PNxxE)
Audio: How Do I Adjust The Bass On My Plasma TV (2008 - 2010 PNxxA - PNxxC Neo User Interface)
Instructions on how adjust the bass on your plasma TV (2008 - 2010 PNxxA - PNxxC Neo User Interface)
Networking: Connecting To A Wireless Network With A Wireless Linkstick (2011-2012)
Connecting your TV to your home network using a Samsung Linkstick wireless adapter
What Is The RGB Only Setting?
The RGB Only Mode option is used for calibration purposes only. With this option turned on the TV can apply a Red, Green, or Blue filter for use when calibrating the TV. Off: Disables RGB Only Mode. Red: Applies a Red Filter to the picture. Green: Applies a Green Filter to the picture.
Why Can't I Turn Closed Captions On?
Closed Captioning Function Accessible Inaccessible If the closed captioning feature is greyed out on your TV this means you are on a source that does not carry the CC signal. Selected Source Carries CC signal Connection Coax Yes AV Yes
How Do I Get Rid Of The Black Bars On The Sides Of My Screen?
When set to the 4:3 picture size, wide screen TVs typically have black space or bars to the left and right of the picture. To remove the black bars, you have to change your picture size. You can change the picture size in two ways: If your remote has a P. Size button, by pressing the P.
Networking: Using Windows Media Player 11 To Share Media To Your DLNA/Allshare TV
How to setup windows media player 11 to stream music, pictures, and video to your DLNA/Allshare TV
How To Use The Wireless LinkStick With Your Television
Connecting your television to your home network using the wireless Linkstick