Print

Print this page


14633. How To Reset The Water Filter Light On A Side By Side Refrigerator


contents

STEP 1. How To Reset The Water Filter Light


No title

Your refrigerator is equipped with a water filter indicator light. The indicator light is normally blue. The indicator light changes color after 6 months or approximately 400 gallons passes through the dispenser. It wil change to purple or red.

Note: If the indicator light changes, but ice production or water pressure from the dispenser are still working properly, there is no need to change the filter. If this is the case, you just need to reset the indicator light by pressing and holding the button with "Hold 3 sec for filter reset" on it.

Important: If the light is already off or blue the indicator light does not need to be reset. Beginning in 2010, the filter indicator light stays off until 6 months has passed, or 400 gallons of water have been dispensed.

To reset the water filter indicator light, follow the steps below:

  1. Locate the button on your display panel with the words "Hold 3 sec for filter reset" printed on it.
  1. Press and hold the button (usually Alarm, Energy Saver, or Water button) until the light changes.
  2. Important: If the light is already off or blue the indicator light does not need to be reset. Beginning in 2010, the filter indicator light stays off until 6 months has passed, or 400 gallons of water have been dispensed.

     

Print