[How-to Guides] How to replace the imaging unit

Last Update date : 2017.01.17

STEP1. How to replace the imaging unit 1 No title

[Overview]

The life of the imaging unit is approximately 50,000 pages for black and 12,500 pages for color.

Replace the imaging unit when the printer control panel displays ‘Replace Imaging Unit’.

[Solution]

1. Turn the printer off, then wait a few minutes for the printer to cool.

2. Using the handle, completely open the left cover until it is at right angles to the main frame and the toner cartridges are ejected.

    Caution

    If the left cover is not completely open, the top cover release button does not be pressed.

3. Press the top cover release button to unlatch the top cover and open it all the way.

4. Pull the lock levers on each side towards you, as shown below, to release the transfer belt.

5. Using the handle, lift the transfer belt out of the printer by lightly pulling it towards the left of the printer. Set it on a clean flat surface.

 

 

Share this item

Close Share pop-up

Thank you!

We appreciate you filling in this questionnaire and thank you for helping us improve the Samsung.com website.

ok