How to upgrade the F40 Firmware

Last Update Date : Apr 20. 2018

I'll send the new software Image. There are two files (F40_dsp.bin and F40_micom.bin)

First, please copy these files to SD Card or SDHC Card

Turn on the F40

Insert the SD/SDHC Card to F40 in Camera EE mode.

If the display reads "change to storage card?" press [Left] or [Right} to select "YES" and press [OK](SMX-F43/44 Only)

The display will read, "Update DSP F/W?" Then select "Yes". Please reference figure 8-8.


Push the  Select Button

The update will start and the LCD monitor will like like figure 8-9


When complete, turn the unit on and check F/W. [menu] → Left Key → [setting] → Up Key → Version



DO NOT power off the set OR eject the card until the update is complete. When the update is complete the unit will turn off automatically

The unit should be plugged into the AC adaptor and DO NOT attempt F/W with just the battery.

Thank you for your feedback!

Not finding what you're looking for? We're here to help.



We aim to respond within 24 hours for all enquiries.

Email CEO

Directly contact the CEO's Office for any suggestions on how Samsung can assist you better


East Africa

Kenya 0800 545 545
Tanzania 0800 780089
Sudan 1969
Uganda 0800 300 300
DRC 499 999
Rwanda 9999

West Africa

Nigeria 0800 726 7864
Ghana 0800 100077
Senegal 80000-0077
Ivory Coast 8000-0077
Cameroon 67095 0077

South Africa

South Africa 0860 726 7864
Mozambique 847267864
Zambia 0211 350 370 / 3434
Namibia 08 197 267 864
Mauritius 800 2550
Reunion 02625088 80
Zimbabwe 0808 0204

* For any printer related enquiries please visit the HP website .

Face-to-face support

Service Location

Search the nearest Samsung Service Centres in your area

Contact Us