I Get Snow/Static When Trying To Use My DVD-VCR Combo For The First Time.
The problem with snow and static is probably caused by in incorrect RF output channel setting. The RF output channel on your combo unit is preset to a Channel , a channel that most cable companies leave blank so people can hook up VCRs and DVD players to their TVs. However, some cable companies leave a Channel blank. If your cable company leaves a Channel blank, you must change the preset RF output channel on your combo unit to a Channel .
Depending on the model you have, you can change the preset RF output channel by changing the position of a VCR Tuner Channel Selector switch on the back of your unit or by accessing the on-screen menu. Both procedures are covered below.
Using the VCR Tuner Channel Selector Switch
If your combo unit has a VCR Tuner Channel Selector switch on its back panel, follow these steps to change the RF Output channel:
Turn off your combo unit.
Turn off your TV.
Find the VCR Tuner Channel Selector switch on the back of your unit. For most combo units, the switch is next to the RF input and RF output jacks.
Move the adjustment control to another channel.
Using the On-Screen Menu
If your combo unit does not have a VCR Tuner Channel Selector switch on its back panel, follow these steps to change the RF Output channel:
Disconnect the cable television cable from the RF Input jack on the back of your combo unit.
Important: Do not disconnect the combo unit from the TV.
Turn on your combo unit.
Turn on your TV and set it to a Channel that is not used .
Press the Setup button on your remote. The Main menu appears.
Using the Up and Down or Right and Left buttons on your remote, move the selection cursor to Option Setup. Press Enter.
Using your remote, move the selection cursor to RF Output Channel.
Press the Right button on your remote to change the channel to a channel thhat is not in use.
Press the Return button on your remote. A message appears on your TV.
Press the Enter button on your remote. A message appears on your TV.
When the message disappears, change your TV channel to the setting that pyou have done.
Reconnect the cable television cable.
Thank you for your feedback!
Not finding what you're looking for? We're here to help.
0800 545 545
Tanzania 0800 780089
Uganda 0800 300 300
DRC 499 999
Nigeria 0800 726 7864
Ghana 0800 100077
Ivory Coast 8000-0077
Cameroon 67095 0077
0860 726 7864
Zambia 0211 350 370 / 3434
Namibia 08 197 267 864
Angola 917 267 864
Mauritius 800 2550
Reunion 02625088 80
Zimbabwe 0808 0204
* For any printer related enquiries please visit the HP website .
Search the nearest Samsung Service Centres in your area