Calibration Mode on Samsung Washing Machines

Last Update date : Oct 20. 2020

Samsung washing machines are able to detect the weight of a laundry load automatically. This will help optimise the energy efficacy of the washing machine and reduce the chance of using too much water. To make sure the washing machine is optimised for load detection, run Calibration Mode. Not all washing machines will require this step. It's best to run Calibration Mode as soon as you've installed the washing machine.

 

Below is two options to run Calibration Mode depending on which washer you have.

Initialise Calibration Mode on Samsung Washers:

Top Loader (Option 1).

  1. Remove laundry or any contents in the machine.
  2. Press Temp. and Delay End simultaneously for at least 3 seconds when the power is turned on.
  3. Press START/PAUSE to activate Calibration Mode.
  4. The pulsator rotates clockwise and counterclockwise approximately 1 minute.
  5. When Calibration Mode is finished, “0” appears on the display, and the washer automatically turns off. The washer is now ready for use.
Top Loader (Option 2).

  1. Remove laundry or any contents in the machine.
  2. Press and hold Water Level and Delay End simultaneously for at least 3 seconds when the power is turned on.
  3. Press Start/Pause to activate Calibration Mode.
  4. The pulsator rotates clockwise and counterclockwise approximately 1 minute.
  5. When Calibration Mode is finished, “End” appears on the display, and the washer automatically turns off. The washer is now ready for use.

 

Front Loader (Option 1).

  1. Press Power to turn on the washing machine.
  2. Press and hold Smart Control for 3 seconds.
  3. Press the Up/Down arrows to select Calibration. Then, press OK.
  4. Press Start/Pause to start Calibration.
  5. The door will be locked during the operation. The drum keeps rotating clockwise and anticlockwise for several minutes.
  6. When complete, the washing machine turns off automatically.
Front Loader (Option 2).

  1. Power off, and then power on the washing machine.
  2. Hold down Temp. and Delay End+ simultaneously for 3 seconds to enter Calibration mode. The “Cb” message appears.
  3. Press and hold Start/Pause (Hold to Start) to run the Calibration cycle. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
  4. When the cycle is complete, “0” appears on the display and the washing machine will turn off automatically. The washing machine is now ready for use.

If neither of these methods work for your machine, please visit the Support Centre to download the full User Manual for your machine for further information.

 

If the problem is still present after going through these steps, please get in touch with our Samsung Care experts on 1300 362 603 (Toll Free in Australia) or contact our Live Chat Australia team to organise a technician to come out and diagnose further.

Thank you for your feedback!