Microwave Errors Codes.

Last Update date : Oct 30. 2020
Samsung Microwave

An error code displaying on your Samsung Microwave means that there are some problems restricting your Microwave operating correctly or safely. Most error messages generally means that you will need a technician to have a look at your appliance. However, there are a couple of error codes that you may be able to fix yourself before getting in contact with our Support Centre.

 

If your Microwave displays any error codes, cycle through the power by turning the appliance off at the switch and unplugging it at the power point for at least 60 seconds. Once the 60 seconds has passed, plug the microwave back in again and turn it on. If the error codes remains, please get in contact with our Support Centre.

 

Below is a list of microwave error codes and their meanings.

Microwave Error Codes

SE

Clean the keys and check if there is water on the surface around the keypad. Turn off the microwave oven and try setting again.

E-12, E-45

The “E-12”, “E-45” message is displayed when there is a Short Gas Sensor error and a cooling error. In this case, turn off the microwave oven and let it cool for at least 5 minutes.

Door

The “Door” message is displayed when the user opens the door during PH/ Easy (Humidity) Sensor operation. Cancel the present mode and restart from the beginning.

C-d0

Clean the keys and check to see if there is any water on the surface around the keypad. If it occurs again, turn off the microwave oven for a minimum of 30 seconds and try setting again.

C-10

Press the Stop/Cancel button and operate again. If the error code appears again, turn off the microwave oven for a minimum of 30 seconds and try setting again.

E-15

The “E-15” message is automatically activated when you open the door or push Stop/Eco key on Sensor Cook Mode. Press Stop/Eco key to return to initialization mode.

E-24

The “E-24” message is automatically activated prior to the microwave oven overheating. Should the “E-24” message be activated, press the Stop/Eco key to utilize the initialization mode.

If the problem persists or the above information does not remedy the error code, please consult the user manual from our Manuals & Downloads page. Otherwise, please get in touch with our Samsung Care Australia experts on 1300 362 603 (Toll Free in Australia) or contact our Chat Support team.

Thank you for your feedback!