Galaxy A30: Device Layout and Functions

Last Update date : Aug 02. 2021

Please Note: This guide is designed for Australian variant Galaxy devices, if you have an international device and require further support click here to reach out to your Samsung Subsidiary.

A full 6.4 inches of the edge-to-edge Infinity-U Display means you will be able to immerse yourself in your favorite games and videos. With the near bezel-less FHD+ Super AMOLED screen, the Galaxy A30 is redesigning entertainment to give you more of what you love.

With a 4,000mAh (typical)* battery the Galaxy A30 is ready to last all day, you can make the most of every moment. And no need to worry about charging — the Galaxy A30 has quick 15W Fast Charging so you can get back to doing what you do and not miss out on life.

a30 device layout

Charging the battery

It is recommended to charge the battery before using it for the first time or when it has been unused for extended periods. Please ensure you charge your device only with Samsung approved chargers and cables. Unapproved chargers and cables could damage your device.

1 Connect the USB cable to the USB power adaptor.
2 Plug the USB cable into the device’s multipurpose jack.
charging device
3 Plug the USB power adaptor into an electric socket.
4 After fully charging, disconnect the charger from the device.

Then, unplug the charger from the electric socket.

Caution:

  • Connecting the charger improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty. 
  • Only use USB Type-C cable supplied with the device. The device may be damaged if you use Micro USB cable.

Battery charging tips and precautions:

  • Using a power source other than the charger, such as a computer, may result in a slower charging speed due to a lower electric current.
  • If the battery is completely discharged, the device cannot be turned on immediately when the charger is connected. Allow a depleted battery to charge for a few minutes before turning on the device.
  • While charging, the device and the charger may heat up. This is normal and should not affect the device’s lifespan or performance. If the battery gets hotter than usual, the charger may stop charging.
  • If the device is not charging properly, take the device and the charger to a Samsung Service Centre or Book a Repair via AusPost.

Inserting the SIM card

The Australian variant Galaxy A30 supports a single nano SIM card which can be purchased from your mobile telephone service provider or local retailer.

insert single sim card in galaxy a30
1 Insert the ejection pin into the hole next to the tray to loosen the tray.

Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged.
2 Pull out the tray gently from the tray slot.
3 Place the SIM card on the SIM card tray with the gold-coloured.
4 Gently press the SIM card into the SIM card tray to secure it.

If the card is not fixed firmly into the tray, the SIM card may leave or fall out of the tray.
5 Insert the tray back into the tray slot.
  • If you insert the tray into your device while the tray is wet, your device may be damaged. Always make sure the tray is dry. 
  • Fully insert the tray into the tray slot to prevent liquid from entering your device.

Correct card installation:

Single SIM models: correct card installation

Please Note: Galaxy A30 only supports nano SIM cards.

Installing a Memory card (MicroSD card)

The Galaxy A30 comes with 32 GB of in-bult storage but can support up to 512 GB of external memory. Please note that some SD cards may not be compatible with your device depending on the memory card manufacturer and type.

insert micro sd card
1 Insert the ejection pin into the hole next to the tray to loosen the tray.

Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged.
2 Pull out the tray gently from the tray slot.

When you remove the tray from the device, the mobile data connection will be disabled.
3 Place a memory card on the memory card tray with the gold-coloured contacts facingdownwards.
insert micro sd card
4 Gently press the memory card into the memory card tray to secure it.

If the card is not fixed firmly into the tray, the memory card may leave or fall out of the tray.

5 Insert the tray back into the tray slot.

Caution:

  • If you insert the tray into your device while the tray is wet, your device may be damaged. Always make sure the tray is dry. 
  • Fully insert the tray into the tray slot to prevent liquid from entering your device.

Need help formatting or removing your SD card? Check out our page Formatting and Removing MicroSD card from Samsung Phone for step-by-step instructions.

Powering the device on and off

Press and hold the Power key for a few seconds to turn on the device. When you turn on your device for the first time or after performing a data reset, follow the on-screen instructions to set up your device. To turn off the device, press and hold the Power key, and then tap Power off.


Restarting the device:

To restart the device, press and hold the Power key, and then tap Restart. If your device is frozen and unresponsive, press and hold the Power key and the Volume Down key simultaneously for more than 7 seconds to restart it. 

restarting device (holding down power and volume down buttons)

If you require further assistance, please consult the user manual from our Manuals & Downloads page or contact our Samsung Care Australia experts on 1300 362 603 (Toll Free in Australia). Otherwise, you can also contact our Chat Support team or reach us through Samsung Members. Check out our guide Using Samsung Members for more information. 

Thank you for your feedback!

RC01_Static Content