* Based on testing by SLG Prüf- und Zertifizierungs GmbH, in accordance with the IEC 62885-4 Cl.5.8 standard. Measured at the inlet of the non-motorized tool when the dustbin is empty, using Jet Mode and a sufficient capacity battery that is fully charged. Results may vary depending on actual usage. ** The stated run time is applies when using a sufficient capacity battery (2500mAh) at the minimum power level with a non-motorized tool attached. Results may vary depending on actual usage.*** The ability to identify different cleaning environments and the time it takes to change the settings can be affected by environmental conditions. The operation of AI Cleaning mode 2.0 may be limited in certain environments, such as when the All-in-one Clean Station is unplugged or the Bluetooth connection status between the stick vacuum cleaner and the All-in-one Clean Station is unstable.)**** Refers to dust particles with the size of 0.3µm or above.
* AI Cleaning Mode 2.0 with new Jet Dual Brush+ recognizes 4 types of flooring: hard floors, lifted surfaces, and long- and short-pile carpets.** The updated functions of AI Cleaning Mode 2.0 can be activated after registering the stick vacuum cleaner on the SmartThings App available on Android and iOS and WiFi is on. The operation of AI Cleaning mode 2.0 may be limited in certain environments, such as when the All-in-one Clean Station is unplugged or WiFi is off or unstable or the Bluetooth connection status between the stick vacuum cleaner and the All-in-one Clean Station is unstable. In such cases, AI Mode operates limitedly. If AI Cleaning mode 2.0 does not work frequently, please move the All-in-one Clean Station to a space without obstacles nearby. To enable continuous function updates, keep the Wi-Fi in the house on at all times. A Samsung account is required.*** The ability to identify different cleaning environments and the time it takes to change the settings can be affected by environmental conditions.**** Based on internal testing when using the Jet Dual Brush+, in accordance with the global average ratio of the floor composition – wooden floor 76% and carpet 24%. It achieves the same cleaning performance as Mid mode with 2% or less difference in cleaning efficiency, in accordance with the IEC 62885-2 Cl. 5.1 and 5.4 standard. The battery consumption was measured based on the actual amount of power consumed while using the vacuum cleaner for 35 minutes from a fully charged state. The maneuverability is based on the actual measured value in accordance with the IEC 62885-2 Cl. 7.3.9 standard. In average, the maneuverability increases by 8% compared to Mid mode. Results may vary depending on the actual usage conditions. The effect may differ when using the Slim LED Brush+.
* AI Cleaning Mode 2.0 recognizes 5 usage conditions, including hard floor, carpet, corner, mat and lifting (moving).** The updated functions of AI Cleaning Mode 2.0 can be activated after registering the stick vacuum cleaner on the SmartThings App. The operation of AI Cleaning mode 2.0 may be limited in certain environments, such as when the All-in-one Clean Station is unplugged or the Bluetooth connection status between the stick vacuum cleaner and the All-in-one Clean Station is unstable. In such cases, it operates in AI Cleaning mode 1.0. To enable continuous function updates, keep the Wi-Fi in the house on at all times.*** The ability to identify different cleaning environments and the time it takes to change the settings can be affected by environmental conditions.**** Corner and floor-wall joint detection only operates in hard floor environments. "Corner" refers to the area where two flat and closed walls meet. The suction power increases about 2-3.5 seconds after the brush is pressed against the wall. If the brush contacts only one side of the corner or if there is a gap in the corner, it may not be recognized as a corner, and the recognition accuracy and reaction speed may vary depending on the actual usage conditions.***** Based on internal testing when using the Slim LED Brush+, in accordance with the global average ratio of the floor composition – wooden floor 76% and carpet 24%. It achieves the same cleaning performance as Mid mode with 2% or less difference in cleaning efficiency, in accordance with the IEC 62885-2 Cl. 5.1 and 5.4 standard. The battery consumption was measured based on the actual amount of power consumed while using the vacuum cleaner for 35 minutes from a fully charged state. The maneuverability is based on the actual measured value in accordance with the IEC 62885-2 Cl. 7.3.9 standard. The maneuverability increases by 8% in average compared to Mid mode. Results may vary depending on the actual usage conditions.
* The stated run time applies when using a high-capacity battery (2500mAh) and the minimum power level with a non-motorized tool attached. Results may vary depending on actual usage.** Optional, and sold separately. The battery components may differ by model.***Battery Management System provides Safety Control algorithm in 4-StepsStep1. Check Gas emission recognizing pressure of gasStep2. Control the level of supplying power with recognizing the temperatureSetp3. Limits electric voltage and current to control the temperature Setp4. Shut off the Battery connection in dangerous situations**** Maintains 70% capacity after 500 cycles of use, based on the battery package capacity. 1 cycle: Full discharge after being full charged (100% ~ 0%). Results may vary depending on actual usage. Based on internal testing.***** The 2 year warranty is limited to the battery only and excludes normal wear and tear. The battery can be replaced free of charge when used for less than 500 cycles and the remaining battery life is over 70%. 1 cycle: Full discharge after being fully charged (100% ~ 0%). Applies to all BESPOKE Jet models sold from January 2023.