How do I use the UV brush on my Samsung Motion Sync Sensor Bagless Cylinder vacuum?
Insert the UV brush in the hose as depicted. The parts will audibly click when they are securely fastened together.
2. Press the SUCTION (-/+) and BRUSH ON/OFF for operation.
Select a lower power/higher power
UV brush ON/OFF
For safety erasons, UV brushing only runs for 30 minutes then stops operating. To resume a stopped operation press the BRUSH ON/OFF button again.
Note: the UV brush that is assembled into the hose handle (not directly connected to the pipe) is specifically for bedclothes.
Not finding what you're looking for? We're here to help.
Tweet us | 9am-9pm, 7 days a week.
We are here to help | 9am-9pm, 7 days a week.
Monday to Sunday | 8am to 10pm
SmartThings Monday to Friday | 9am to 5:30pm
We'll respond within 24 hours of your request.
Check the status of your repair with Samsung
Help with Hubs, Kits, Sensor and Outlets
Monday to Friday | 8am to 10pm
Monday to Friday | 9am to 6pm
Calls to 0818 numbers are a National Call number.
These are subject to call charges which vary by network and are subject to change.
Calls maybe recorded for training and quality purposes.
* For any printer related enquiries please visit the HP website.
Find out more about how you can get face to face help.