LE displays on the panel.
If the washer is displaying "LE" on the display panel, most likely there is a problem with the Water Level Sensor or your washer has a leak.
If there are no visible leaks, empty the washer of all clothes, and then fill the empty washer with water. Do not add detergent.
If you see suds in the water, then most likely you are using NON-HE detergent, or too much HE detergent, and this, not the Water Level Sensor, is causing the washer to display a false code.
To resolve the problem, Samsung recommends using the correct amount of HE detergent as per the detergent manufactures instructions on the detergent bottle.
• If you are using HE detergent and see suds, then you may be using too much detergent, and this is causing the washer to display a false code.
To resolve the problem, use the recommended amount of detergent as per the detergent manufacture’s recommendations.
There are two lines, the bottom line is for a normal load, and the top line is for a heavy load.
For a normal load, fill to the bottom line.
Although it does not look like enough amount of detergent, it is proper amount and does clean your clothes, and also save your money.
Below are images of overfilled detergent compartment, and the consequences.
Too much detergent causes excessive suds.
Excessive suds cause water leakage at the bottom of the door.
(Too much suds push the door outside)
Or a water leakage at detergent box.
Thank you for your feedback!
Need help? Contact Us for Support.
Call Support 24/7
Just Dial #GALAXY (#425299)
[Free call to all networks]
(02) 422-2177 [Standard Landline]
1-800-10-726-7864 [PLDT Toll Free]
1-800-8-726-7864 [Globe Toll Free]
(02) 422-2111 [Standard Landline]
* For Toll Free numbers, just directly dial 1-800 followed by the network number.