Temperature indicator does not appear on the AC's remote control display.
Check if the Fan Mode is Selected
If the AC operates on Fan Mode, the desired temperature does not appear on the remote control.
You cannot control and see temperature on Fan mode. You can control only the Fan speed.
Note: Fan mode can be selected to ventilate the room. It will be helpful to refresh the stale air in the room.
Check if the Turbo Speed Mode is enabled
If the Air conditioner operates on Turbo (speed) mode, the desired temperature does not appear on the remote control.
Press the Turbo button on the remote control during the cool mode.
Turbo indicator appears on the remove controller display and the air conditioner operats in Turbo function for 30 minutes.
You cannot control temperature and fan speed on Turbo mode.
If you want to cancel turbo mode, press the Turbo button once again.
Note: Turbo function will be helpful to cool the room quickly and effectively.
Thank you for your feedback!
Need help? Contact Us for Support.
Just Dial #GALAXY (#425299)
[Free call to all networks]
(02) 422-2177 [Standard Landline]
1-800-10-726-7864 [PLDT Toll Free]
1-800-8-726-7864 [Globe Toll Free]
(02) 422-2111 [Standard Landline]
Available from 8:00 AM to 8:00 PM
* For Toll Free numbers, just directly dial 1-800 followed by the network number.