How to replace the lamp

Last Update Date : Apr 11. 2018

STEP 1. How to replace the lamp 1

[Solution]

Use a refrigerator light bulb rated for no more than 30 watts. Important: Unplug the refrigerator first to avoid an electric shock.

1 Refrigerator Compartment

Step1) Push both sides of the upper lamp cover inward, and then pull the cover out of the air duct. The upper lamp cover is identified by the arrows in the diagram below.

How to replace the lamp

Step2) Push both sides of the bottom lamp cover inward, and then pull the cover out of the air duct.

How to replace the lamp

Step 3) Unscrew the old bulbs, and then screw in the new bulbs.

Caution!
The old light bulbs may be hot!

Step 4) Reattach the bottom bulb cover, and then the top bulb cover.

Step 5) Plug in the refrigerator.

2 Freezer Compartment

Step 1) Push the center of the light cover's upper side, and then pull down the light cover.

How to replace the lamp

Step 2) Replace the bulb with a size A15, 40 watt or smaller bulb.

Caution!

The light bulbs may be hot!

Step 3) Reattach the light cover. First, align the rear hook of the light cover to the light case, and then push the front hook into place.

How to replace the lamp

Step 4) Plug your refrigerator back in.

STEP 2. How to replace the lamp 2

3 The Arctic And Fresh Select Zones

The Arctic and Fresh Select Zone light are located in their respective compartments. Both the Arctic and Fresh Select Zones use a size E17, 30 watt bulb.

 

To change the light bulb in the Arctic or Fresh Select Zones, follow these steps:

 

Step 1) Unplug your refrigerator.

 

Step 2) Open the door of the compartment in which you want to change the lamp, and then remove all the food.

How to replace the lamp

Step 3) Check the lamp cover attached to the lower part of the partition in the refrigerator.

How to replace the lamp

Step 4) Push the front side of the lamp cover to separate it from the front hook, and then pull down.

How to replace the lamp

Step 5) Remove the old lamp by turning it counter clockwise. Install the new lamp by turning it clockwise.

How to replace the lamp

Step 6) To replace the lamp cover, fit the rear hook of the lamp cover into the groove first, and then lift it to fit in the front hook.

How to replace the lamp

Step 7) Plug your refrigerator back in.

Step 8) Return the food to the compartment.

[Important reminders]

1. Be careful when you disassemble, it is fragile due to low temperature inside
2. Double check the lamp before replacing if you use correct one

Thank you for your feedback!

Not finding what you're looking for? We're here to help.

Online

Chat with Us

Live Chat support with a Samsung product expert.
From 08:00AM – 10:00PM All week Days

Send us an Email

We'll respond your query quickly.

Email to CEO

Contact the dedicated CEO's Office.

Call

800 24 7 4357Inside Saudia Arabia

From 08:00AM – 10:00PM All week Days

+966 800 24 7 4357Outside Saudia Arabia

* For any printer related enquiries please visit the HP website .

Face-to-face support

Contact Us