How to connect to a TV with cable

Last Update Date : May 17. 2018

[Solution]

You can connect to the TV with various Cable. Choose one of the four methods for connecting to a TV.

1. Connecting to the TV with HDMI Cable (BEST QUALITY) (RECOMMENED)

    1) Using an HDMI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the HDMI IN terminal of your TV.

    2) Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears on your TV screen.

      • If you have set the remote control to operate your TV press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.

    ※Note:

    If the HDMI cable is connected or removed during playback of a CD-DA, the player will stop playing.

    If the player is connected to your TV in HDMI 1080p output mode, you must use a High speed(category2) HDMI cable.

2. Connection to the TV with DVI Cable (BEST QUALITY)

    1) Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc

    2) Player to the DVI in terminal of your TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) in terminals of your TV. Turn on the Blu-ray Disc Player and TV.

    3) Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on your TV screen.

      • If you have set the remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.

    Important:
    Connecting the HDMI cable while the Blu-ray Disc Player’s power is on will result in the player’s video output being changed to HDMI mode automatically

    

    ※Note :

    Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user's manual of your TV.

    • If an HDMI-DVI cable is plugged into the TV, the Blu-ray Disc Player’s output resolution is set to HDMI automatically within 10 seconds.

    • If Component and HDMI are both connected, HDMI mode is automatically selected.

    When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output resolution will automatically be set to the highest provided by the TV

    If the HDMI cable is connected or removed during playback of  a CD-DA, the player will stop playing.

3. Connecting to the TV (COMPONENT) (BETTER QUALITY)

You will enjoy high quality images with accurate color reproduction. Component video separates the picture element into black and white(Y), blue (PB) and red (PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

    1) Using Component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the COMPONENT in terminals of your TV.

    2) Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) in terminals of your TV. Turn on the Blu-ray Disc Player and TV.

    3) Press the input selector on your TV remote control until the Component signal from the Blu-ray Disc Player appears on the TV screen.

      • If you have set the remote control to operate your TV press the TV SOURCE button on the remote control and select COMPONENT as the external source of the TV.

 

    ※Note:

    • Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PB, PR, Y”. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

    You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 480p and 480i, depending on the disc type.

    The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are connected. The resolution may also be different depending on the disc.

    In DVD playback, if both HDMI and Component jacks are connectedand you select the Component 1080p, 1080i or 720p mode, the Display Setup menu will show the output resolution as 1080p, 1080i or 720p in the menu. The resolution is actually 480i.

4. Connecting to the TV (VIDEO) (GOOD QUALITY)

    1) Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) in terminals of your TV.

    2) Turn on the Blu-ray Disc Player and TV.

    3) Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on the TV screen.

      If you have set the remote control to operate your TV, press the TV SOURCE button on the remote control and select VIDEO as the external source of the TV.

    ※Note:

    • Noise may be generated if the audio cable is placed too close to the power cable.

    If you want to connect to an Amplifier, please refer to the Amplifier connection pages.

    The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV.

    If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the Blu-ray Disc Player.

    The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu

    • Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.

Not finding what you're looking for? We're here to help.

Online

Chat with Us

Live Chat support with a Samsung product expert.
Sun ~Thu 09:00AM to 06:00PM

Send us an Email

We'll respond your query quickly.

Email to CEO

Contact the dedicated CEO's Office.

Call

800 24 7 4357Inside Saudia Arabia

From 08:00AM – 10:00PM All week Days

+966 800 24 7 4357Outside Saudia Arabia

* For any printer related enquiries please visit the HP website .

Face-to-face support

Contact Us