Connect Cable Box to TV and want the sound output to be from the Home Theatre System
You will need to connect the Red, White, Yellow cable from the cable box to the TV AV.
Use another Red and White cable from TV's Audio out to Home Theatre Aux in 2.
Then on the Home Theatre remote control, press 'Aux' button 2 times or until it shows Aux 2 on the display.
This section explains two ways (digital and analog) of connecting the unit to the TV.
This unit is equipped with two optical digital jacks and one audio analog jack for connecting a TV.
Connect AUDIO IN on the main unit to the AUDIO OUT of the TV or Source Device.
Be sure to match connector colors.
OP TICAL DIGI TAL IN 1,2
Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device.
Please take note step on below:
Do not connect the power cord of this product or your TV to the wall outlet until all
connections between components are complete.
Before moving or installing this product, be sure to turn off the power and disconnect the
If you select 'ANALOG' without connecting the Audio Cable, the set is turned off automatically
after 20 minutes.
If a TV or any device connected to Air Track with the optical cable is off and there is no
digital input, the Air Track is turned off after 20 minutes. (If there has been no input signal
for over 20 minutes from DIGITAL AUDIO IN 1 or 2, the Air Track will be turned off.)
When Air Track isn't linked with HT-WDC10 model in the W.iPod mode, Air Track will turn
off after 20 minutes.
Need more help? Contact Us.
Monday to Sunday (Including Public Holidays)
8:00am - 8:00pm
* For any printer related enquiries, please visit HP website .
Find out more about how you can get face-to-face help.