1. Home
  2. /
  3. Connecting your Audio Dock to a Network using Jukeblox (JBC)

Connecting your Audio Dock to a Network using Jukeblox (JBC)

JukeBlox™ is a connectivity platform used to connect tablets, Smart phones, PC's, Mac's, and many other consumer electronics to audio devices such as A/V receivers, audio docks, and wireless speakers. In simple terms, the audio dock will use your Wi-Fi device as a screen to access your wireless network.

Before you begin, you will need

  • Wireless Network Name (SSID) and Network Passkey (password)

       

  • A pointed object such as a paperclip

       

  • A Wi-Fi device such as a Smart Phone, Tab, or PC

Connect Audio Dock to your existing Wireless Network

Follow the steps below to connect your Audio Dock to your existing wireless network.

  1. Next look on the back of the audio dock and using the paperclip (or other pointed object) press the groove in under WPS/Reset button for more than 5 seconds. The LED will turn white and blink once, and then blink twice. Release the button when the white LED blinks twice.

      

      

  2. Press the Function button (F) on the remote or front panel of the audio dock until either the AirPlay or AllShare Play icon is selected.

      

    US_ANS_HTS-HW-JBC-1

      

  3. The LED will then blink red for 5-10 seconds. When The LED turns solid red, proceed to step 4.

      

      

  4. Now on your Smart Phone (or other Wi-Fi device) go to the Settings menu and access the Wi-Fi settings. Search for available wireless networks (just like you would if you were connecting your phone to a wireless network) and then select the 'Samsung W_Audio E670', depending on your model this may read 'Samsung W_Audio E750'. The last three digits vary based on model number. The image below is for the Samsung Galaxy Nexus, your phone or tab may differ.

      

      

    • If you are repeating this step and you have previously connected to the Samsung audio dock, select it and touch 'Forget device' on your phone, you will be required to select and establish the connection again.

  5. On your Smart Phone open up the web browser and then type 'http://192.168.1.1' into the address bar of the web browser and press enter.

      

      

  6. Select your network name (SSID) and then enter the network passkey (password) and touch Apply. A warning appears, touch OK.

      

      

    • The phone then disconnecs from the audio dock and allows the dock to connect to your network. The browser page on your cell phone (or other Wi-Fi device) will display an error since it is no longer connected to the dock. This is normal.

        

    • The LED will then flash red for about 15-30 seconds and then turn solid white when a connection has been established.

        

  7. If the connection fails, verify you are entering the correct passkey in step 6.

Additional Notes

  • The wireless audio dock supports the following security protocols: WEP-->Open. WPA-PSK -->TKIP. WPA2-PSK-->AES.

      

  • If you select the Pure High-throughput (Greenfield) 802.11n mode and set the encryption type on your router to ERP or TKIP, the wireless audio dock will not support a connection in compliance with the new Wi-Fi certification specifications.

      

  • If your wireless router supports DHCP, this wireless audio dock can use a DHCP or static IP address to connect to the wireless network.

Was this content helpful?

Comments:
35 people found this helpful.

How would you like to contact us?

Give us a call 1-800-SAMSUNG (1-800-726-7864)
Mon - Fri : 8AM -12 AM (EST) Sat - Sun : 9AM -11 PM (EST)
Printer support visit: hp.com/support/samsung

Chat with us

Live Chat support with a Samsung product expert.

24 HOURS 7 DAYS A WEEK

Help with your order

Send us your inquiry and we will respond within 24 hours.

Social Support

Contact us on Twitter or Facebook and we'll reply with an answer to your question or issue.

Send us an Email

We’ll respond within 24 hours of your request.

Question about a promotion?

Learn more about Samsung promotions.