1. Home
  2. /
  3. Installing the Water Supply Hose (Steam Dryers Only) (DV50K7500)

Installing the Water Supply Hose (Steam Dryers Only) (DV50K7500)

The dryer must be connected to a cold water tap using the provided water hoses.

Connect the water hose

       

  1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. Then, connect the female end of the Y connector to the cold water tap.

  2. Connect the straight end of the water hose to the Y connector.

  3. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten because the coupling may be damaged.

  4. Connect the angled end of the water hose to the filling valve at the bottom of the rear frame. Turn the coupling manually until it is tight.

  5. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten because the coupling may be damaged.

  6. If you detached the cold water hose from your washer, attach the hose to the open end of the Y connector, tighten the coupling until it is tight, and then, using a pliers, tighten an additional two-thirds turn.

  7. Open the cold water tap, and then check for any leaks.

Using the short hose as an extension

If the Y connector cannot be directly connected to the cold water tap, use the short hose.

                                    

  1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. Then, connect the short hose (B) to the cold water tap. Turn the coupling by hand until it is tight.

  2. Using pliers, tighten the coupling an additional two-thirds turn. Do not over tighten. You can damage the coupling.

  3. Connect the Y connector (A) to the brass male end of the short hose. Turn the coupling by hand until it is tight.

  4. Using pliers, tighten the coupling an additional two-thirds turn. Do not over tighten. You can damage the coupling.

  5. Connect the angled end of the water hoses (C) to the filling valve at the bottom rear of the dryer. Turn the coupling by hand until it is tight.

  6. Using pliers, tighten the coupling an additional two-thirds turn. Do not over tighten. You can damage the coupling.

  7. If you detached the cold water hose from your washer, attach the hose to the free end of the Y connector, tighten the coupling by hand until it is tight, and then, using a pliers, tighten an additional two-thirds turn.

  8. Open the cold water tap, and then check for any leaks.

Was this content helpful?

Comments:
22 people found this helpful.

How would you like to contact us?

Give us a call 1-800-SAMSUNG (1-800-726-7864)
Mon – Fri: 8AM to 12AM (EST) Sat - Sun: Closed Printer support visit: hp.com/support/samsung

Chat with us

Live Chat support with a Samsung Care Pro.

24 HOURS 7 DAYS A WEEK

Help with your order

Send us your inquiry and we will respond within 24 hours.

Social Support

Contact us on Twitter or Facebook and we'll reply with an answer to your question or issue.

Ask the Community

Browse answers, ask questions and get solutions from other Samsung customers.

Send us an Email

We’ll respond within 24 hours of your request.

Question about a promotion?

Learn more about Samsung promotions.