1. Home
  2. /
  3. Running a Cycle on Your FlexWash™ Washer (WV55M9600)

Running a Cycle on Your FlexWash™ Washer (WV55M9600)

Many settings are available to run a cycle with. Choose the best options depending on the type of garment you are washing.

Samsung Flexwash 9600 Running a cycle

Running a Cycle on the Upper Washer

  1. Press POWER to turn the Upper Washer on.

    Samsung Flexwash 9600 Running a cycle
  2. Select your desired cycle.  

    Samsung Flexwash 9600 Running a cycle
    • NORMAL is for lightly soiled cotton, t-shirts, towels, and mixed loads.

    • DELICATES is for sheer fabrics, bras, lingerie, silks, and other handwash-only fabrics. For best results, use liquid detergent.

    • ACTIVE WEAR is for exercise wear such as training pants, shirts/tops, and other performance clothing. This cycle provides effective soil removal with controlled tub rotation for special fabric care.

    • RINSE+SPIN is used for loads that need rinsing only or for loads you want to add rinse-aided fabric softener to.

  3. Press Temp. to cycle through the temperature settings.

    Samsung FlexWash 9600 Cycles
    • Cold is used for brightly colored, very lightly soiled items.

    • Warm is used for colorfast items.

  4. Review the selected settings, and press Extra Rinse to enable it if desired.  

    Settings and options available will vary per cycle. See the chart in the appendix in the user manual for which features are available for each cycle.

  5. Press and hold START/PAUSE until the cycle begins.

    Samsung FlexWash 9600 Upper Washer Cycles

Running a Cycle on the Lower Washer

  1. Press POWER to turn the Lower Washer on.

    Samsung FlexWash 9600 Lower Washer Cycles
  2. Press either CYCLE 1, CYCLE 2, or CYCLE 3 repeatedly to select your desired cycle.  

    Samsung FlexWash 9600 Lower Washer Cycles selection
    • NORMAL is for cottons, bed linens, table linens, underwear, towels, or shirts.

    • HEAVY DUTY is for sturdy, colorfast fabrics and heavily soiled items.

    • SANITIZE is for heavily soiled, colorfast items. This cycle heats the water to 150°F to eliminate bacteria.

    • DELICATES is for sheer fabrics, bras, lingerie, silks, and other handwashonly fabrics. For best performance, use liquid detergent.

    • WHITES is for white items with or without bleach.

    • BEDDING is for bulky items such as comforters, blankets, and sheets.

    • QUICK WASH is for lightly soiled items needed quickly.

    • PERM PRESS is for wash-and-wear, synthetic fabrics, and lightly to normally soiled items.

    • RINSE+SPIN is for for loads that need rinsing only or to add fabric softener to a load.

  3. Press Temp. to cycle through the temperature settings.

    Samsung Flexwash 9600 Temperature settings

      This setting is only available with NORMAL, HEAVY DUTY, SANITIZE, and Self Clean+.

    • Hot is used for whites and heavily soiled, colorfast items.

    • Warm is used for colorfast items.

    • Cool is for brightly colored, very lightly soiled items.

    • Cold is used to run a cycle without any hot water added.

  4. Press Spin to cycle through the spin settings.

    • High is used for underwear, t-shirts, jeans, and sturdy cottons.

    • Medium is used for jeans, wrinkle-free or wash-and-wear items, and synthetics.

    • Low is used for delicate items that require a lower spinning speed.

    • No Spin is used to skip the spin cycle.

    • When no Spin cycle is selected, the Rinse Hold option is selected. This setting will delay the cycle indefinitely without spinning or draining the water, and is used for clothes which need to soak. To complete the cycle, switch to any of the above spin settings.

  5. Press Soil to cycle through the soil level settings.

    • Heavy is used for heavily soiled loads.

    • Normal is used for moderately soiled loads.

    • Light is for lightly soiled loads.

  6. Review the selected settings, and enable options such as Pre SoakSteam, Delay End, or Extra Rinse if desired.  

    Settings and options available will vary per cycle. See the chart in the appendix in the user manual for which features are available for each cycle.

  7. Press and hold START/PAUSE until the cycle begins.

    Samsung FlexWash 9600 Control Pad

Was this content helpful?

Comments:

How would you like to contact us?

Give us a call 1-800-SAMSUNG (1-800-726-7864)
Mon - Fri : 8AM -12 AM (EST) Sat - Sun : 9AM -11 PM (EST)
Printer support visit: hp.com/support/samsung

Chat with us

Live Chat support with a Samsung product expert.

24 HOURS 7 DAYS A WEEK

Help with your order

Send us your inquiry and we will respond within 24 hours.

Social Support

Contact us on Twitter or Facebook and we'll reply with an answer to your question or issue.

Ask the Community

Browse answers, ask questions and get solutions from other Samsung customers.

Send us an Email

We’ll respond within 24 hours of your request.

Question about a promotion?

Learn more about Samsung promotions.