1. Home
  2. /
  3. Adjust Art Mode Settings on Your Frame TV

Adjust Art Mode Settings on Your Frame TV

Frame TV Art Mode

The Frame TV adjusts brightness and color tone automatically according to its surroundings. The sensor is located on the bottom of the Frame, so it can also be influenced by the color of the floor or a table that is below it. Using the Samsung Smart View app on a smart device, you can manually adjust the art mode settings on your Frame TV.

Before You Begin

  • The Frame and the mobile device must be connected to same network (router).

  • An up to date version of the Smart View app is required. 

    • For Android devices, version 2.1.0.75 is needed. 

    • For iOS devices, version 2.0.4.93 is needed. 

  • Verify the TV software version is 1123 or higher.

Check the Frame TV's Software Version

  1. From the Home Screen on the TV, navigate to and select Settings > Support > About This TV.

  2. Look for the line labeled Software Version. It will be located under Product Information, after the Model Code and the Serial Number. 

  3. If the software version is lower than 1123, update the software either over the network, or by USB.

Samsung About This TV

Download the Smart View App on a Mobile Device

For Android or iOS devices, follow these steps:

Open the either the Play Store or App Store respectively, search for "Smart View", and install or update the app to the latest version.

Using the Smart View App to Adjust the Settings in Art Mode

Pictures below were taken from an Android device. Steps in the Smart View app are the same for all mobile devices.

  1. Open the Smart View app and select Samsung The Frame TV.

  2. Touch the Art Mode button located in the upper right corner. Then touch Settings.

Adjust settings such as Art Mode's brightness and color tone.

  • Brightness - Adjust the brightness of the image when displayed full screen.

  • Color Tone - Adjust the color tone of the image when displayed full screen.

  • Night Mode - Set The Frame to turn off automatically if no light is detected in the room.

  • Sleep After - When enabled, The Frame turns off when no motion is detected, and turns on when motion is detected.

  • Motion Detector Sensitivity - Set The Frame to turn off automatically if no motion is detected in the room.

Smart View Art Mode Settings Frame TV