Understanding the meaning of error codes on your Samsung dishwasher
Encountering an error code on your Samsung dishwasher can be frustrating. This guide offers a comprehensive list of Samsung dishwasher error codes, helping you understand the issues and suggesting steps for resolution. Many errors can be addressed with simple troubleshooting, potentially saving you a service call.
Note: This information is specific to Samsung dishwashers sold in Canada.
For Samsung dishwashers equipped with a control screen, its placement varies between two locations: either on the dishwasher's door or at the top edge of the door. It's important to note that not all models feature a display screen. Some models utilize basic LED lights for operation indicators. For those models, we've prepared a dedicated guide to help you interpret the meaning of LED lights on your Samsung dishwasher's control panel.
Control screen on the door
Some Samsung dishwashers with an LCD screen typically position this feature prominently on the upper portion of the appliance's door, adjacent to the handle.
Control screen at the top of the door
Alternatively, some other Samsung dishwashers place the control screen on the top edge of the door, necessitating a slight opening of the door to view.
Clogged filter error
1E or IE (on Waterwall models)
- Issue: Water not passing through the filter.
- Solution: Clean the fine filter. Refer to the user manual for guidance. If the issue persists, contact our Service Centre.
Pump operation error
3C
- Issue: Pump failure.
- Solution: Restart the dishwasher. If the error reoccurs, contact our Service Centre to seek professional help.
High temperature water supply error
3E
- Issue: Excessively hot water supply.
- Solution: Ensure water temperature is below 176°F. If the issue continues, contact our Service Centre.
Water supply error
4C or 4E
- Issue: Inadequate water pressure or temperature.
- Solution: Check water supply requirements, ensure supply is on, and avoid FloodSafe hoses. If unresolved, visit our Service Centre.
Drain error
5C, SC, 5E, SE
- Issue: Difficulty in draining water.
- Solution: Inspect and clean drain connections, hose, filter, and sump.
Waterwall reflector error
7E
- Issue: Waterwall reflector movement issues.
- Solution: Remove packing tape from reflector, ensure correct positioning and no blockages.
Low water level error
9E
- Issue: Insufficient water in the dishwasher.
- Solution: Empty the dishwasher and start a normal cycle. If the issue persists, power off and contact our Service Centre.
Access Point mode
AP
- Issue: Dishwasher in Access Point mode for mobile connection.
- Solution: Restart the dishwasher if not connecting to a device.
Button error
bE, 6E
- Issue: Stuck button detected.
- Solution: Check and press each button. Contact our Service Centre if the issue continues.
Communication error
CE
- Issue: Control panel communication failure.
- Solution: Restart the dishwasher. If unsuccessful, contact our Service Centre to seek professional assistance.
High temperature heater error
HC, 1E, IE (on rotary models)
- Issue: Overheating inside the dishwasher.
- Solution: Power cycle the appliance and run a normal cycle. If recurring, contact our Service Centre to request service.
Heater error
HE
- Issue: Incorrect temperature detection.
- Solution: Run a normal cycle after emptying the dishwasher. Contact our Service Centre if unresolved.
Leakage error
LC, LE
- Issue: Moisture detection (all models) or blocked water reflector (Waterwall models).
- Solution: Address any leaks, ensure no overfilling of detergent, and check the garbage disposal cap. Contact our Service Centre for persistent errors.
Over-level water error
OC, 0C, oE
- Issue: Excessive water, often linked to drainage problems.
- Solution: Inspect and clean drain connections, hose, filter, and sump.
Zone wash error
PC
- Issue: Malfunction in the Zone Wash function.
- Solution: Restart the dishwasher. If the error persists, contact our Service Centre to seek assistance.
Half load function error
PE
- Issue: Half load function not operating correctly.
- Solution: Run a half load cycle after emptying the dishwasher. Contact our Service Centre if the issue continues.
Temperature sensor error
tE
- Issue: Inaccurate temperature readings.
- Solution: Run a normal cycle after emptying the dishwasher. If the error persists, turn off power and contact our Service Centre to seek assistance.
_JPG$)
Thank you for your feedback!
Please answer all questions.
The coding for Contact US > Call > View more function. And this text is only displayed on the editor page, please do not delet this component from Support Home. Thank you