How to change the display temperature from setting temperature to current room temperature using a remote controller?

Last Update date : Mar 11. 2022

In 2021 AR9500T new model (AR**A**) air conditioner, it shows the setting temperature on the display instead of the current room temperature. (AR9500T RAC shows the temperature on the indoor 88 segment display board.) If you want to see the current temperature, please follow the below steps.

  • Step 1. After turning on the indoor unit, press the swing button (left/right) for 5 seconds until you hear a beep.

 

 
press swing button for 5 sec
 
  • Step 2. Then, the temperature type changes to the current temperature.

 

current temperature
 
  • Step 3. When changing the temp with a remote, the indoor unit shows the setting temperature for 5 seconds and then moves on to the current temperature.

 

setting temperature

Note:

- Once the temperature type changes, it remains unchanged after you turn it on/off or unplug it.

- If you need to change the mode back, perform the process again with Steps 1~3.

 

Thank you for your feedback!