Optimized
for data center demands

Coming in a 2.5-inch form factor and 6 Gb/s SATA interface with storage capacities up to 3.84TB,
the 883 DCT meets the demands of server storage systems, with added reliability for critical data
thanks to end-to-end data protection.

1GB=1 billion bytes by IDEMA. Actual usable capacity may be less (due to formatting, partitioning, operating system, applications or otherwise).
Angled side view of Samsung Data Center SSD 883 DCT.

Performance fit
for mixed workloads

The 883 DCT is designed to achieve optimal performance with a high level of QoS (quality of service)
under the SATA interface. The sequential read/write speeds of up to 560/520 MB/s and random
read/write speeds of up to 98K/28K IOPS are ideal for handling massive amounts of data.

Samsung Data Center SSD 883 DCT with infographic describing 99.99% High QoS. Sequential Reads up to 560 MB/s and Sequential Writes up to 520 MB/s.

Performance measured using FIO 2.7 in Linux RHEL 6.5 (Kernel 2.6.32) with queue depth 32, Z170 Intel SATA 6G port. Measurements are performed on whole

LBA range. Write cache enabled. Performance may vary depending on capacity, use conditions, and environment.

Secure
critical data

Data integrity is critical to data center SSD.
The 883 DCT is safeguarded with end-to-end data
protection to ensure consistency over the entire
data transfer path and prevents data corruption in
case of power failure with power loss protection.

Security symbol with End-to-End Data Protection and Power Loss Protection against a scenery of server room.

Enhanced
operations
efficiency

Accomplish far more with less. Achieve higher efficiency
and performance compared to legacy storage systems,
with fewer servers, reduced power and cooling, and lower TCO*,
all with efficient management from the advanced
Samsung SSD Toolkit software.

* Based on internal test results, compared with 2.5-inch 7200 RPM SATA HDDs.
Cost reduction symbol with Power-efficiency and Samsung SSD Toolkit against a scenery of server room.

Samsung
reliability and quality

Experience the superior SSD quality and reliability of in-house production using Samsung built components.
Empower your 24/7 business to run faster, more efficiently, and at reduced costs with world-class dependability*
with a limited 5-year warranty or 0.8 DWPD**.

V-NAND, Controller, DRAM, Firmware symbols against a scenery of server room.

* When upgrading from HDDs.

** 5 years or DWPD (Drive Writes Per Day), whichever comes first.

SPECIFICATIONS

Form Factor

2.5 inch

Capacity

240 GB, 480 GB, 960 GB, 1,920 GB, 3,840 GB

Sequential Read Speed

Max. 560 MB/s

Sequential Write Speed

Max. 520 MB/s

Show More Specs layer open

MORE SPECS

Model Code (Capacity)1)

  • MZ-7LH240NE (240 GB)

  • MZ-7LH480NE (480 GB)

  • MZ-7LH960NE (960 GB)

  • MZ-7LH1T9NE (1,920 GB)

  • MZ-7LH3T8NE (3,840 GB)

General Feature

  • APPLICATION

    Data Center

  • FORM FACTOR

    2.5 inch

  • INTERFACE

    SATA 6.0 Gbps

  • DIMENSION (WxHxD)

    Max. 100.2 x 69.85 x 6.8 (mm)

  • WEIGHT

    Max. 70g

  • NAND TYPE

    Samsung V-NAND

Special Feature

  • ENCRYPTION SUPPORT

    AES 256-bit

Performance2)

  • SEQUENTIAL READ

    Up to 560 MB/s

  • SEQUENTIAL WRITE

    Up to 320 MB/s:
    MZ-7LH240NE (240 GB)


    Up to 520 MB/s:
    MZ-7LH480NE (480 GB),
    MZ-7LH960NE (960 GB),
    MZ-7LH1T9NE (1,920 GB),
    MZ-7LH3T8NE (3,840 GB)

  • RANDOM READ (4KB, QD32)

    Up to 98,000 IOPS

  • RANDOM WRITE (4KB, QD32)

    Up to 14,000 IOPS:
    MZ-7LH240NE (240 GB)


    Up to 24,000 IOPS:
    MZ-7LH480NE (480 GB)


    Up to 28,000 IOPS:
    MZ-7LH960NE (960 GB),
    MZ-7LH1T9NE (1,920 GB),
    MZ-7LH3T8NE (3,840 GB)

  • QoS READ (99.99%, 4KB, QD1)

    Up to 0.5 ms

  • QoS WRITE (99.99%, 4KB, QD1)

    Up to 0.3 ms

Power Consumption3)

  • ACTIVE READ

    Typ. Up to 3.6 W

  • ACTIVE WRITE

    Typ. Up to 2.3 W

  • IDLE

    Up to 1.3 W

Environment

  • ALLOWABLE VOLTAGE

    5.0V ± 5%

  • RELIABILITY (MTBF)4)4)

    2.0 Million Hours

  • UBER5)5)

    1 sector per 1017 bits read

  • OPERATING TEMPERATURE

    0 - 70 ℃

  • SHOCK

    1500G, duration 0.5 ms, Half Sine Wave

Warranty

  • MZ-7LH240NE (240 GB)

    5 Year or 0.8 DWPD

  • MZ-7LH480NE (480 GB)

    5 Year or 0.8 DWPD

  • MZ-7LH960NE (960 GB)

    5 Year or 0.8 DWPD

  • MZ-7LH1T9NE (1,920 GB)

    5 Year or 0.8 DWPD

  • MZ-7LH3T8NE (3,840 GB)

    5 Year or 0.8 DWPD

  • 1) 1 GB = 1 Billion bytes by IDEMA. Actual usable capacity may be less (due to formatting, partitioning, operating system, applications or otherwise).
  • 2) Based on PCI Express Gen3 x4.
    1) Random performance measured using FIO 2.7 in CentOS6.6 (kernel 3.14.29) with 4KB (4,096 bytes) of data transfer size in queue depth 32 by 4 workers and Sequential performance with 128KB (131,072 bytes) of data transfer size in queue depth 32 by 1 worker.
    2) 1 MB/sec = 1,000,000 bytes/sec was used in sequential performance.
  • 3) Actual power consumption may vary depending on system hardware & configuration. Active power is measured using IOMeter2006 on Windows Server 2012.
  • 4) MTBF is Mean Time Between Failure. By definition, Mean Time between Failures (MTBF) is the estimated time between failures occurring during SSD operation.
  • 5) Uncorrectable Bit Error Rate (UBER) is a metric for the rate of occurrence of data errors, equal to the number of data errors per bits read as specified in the JESD218 document of JEDEC standard. For enterprise applications, JEDEC recommends that UBER should be below 10-16.
    *Comparisons are based on internal test results with 2.5-inch 7200 RPM SATA HDDs.

DOWNLOAD FILES