SAMSUNG assumes no responsibility, and shall not be liable, in connection with whether any such products or services will be appropriate, functional or supported for the SAMSUNG products or services available in your country.
It appears that the same product is registered more than once in your account. Please select the registered model you would like to update below.
Need to update or add additional registration information?
Use Our Interactive Tool To Fix Common Problems.
Explore tips, articles, ideas, and more.
Your message has been sent.
Download data unavailable
Page of 22/2
Recording & Playing A Movie Clip.
Connect your camera to your computer. Note: USB Debug needs to be set to Off, to check if it set ON click here. Click on the start button on your computer. Right click My Computer and select Properties. Click the hardware tab, and then click device manager. Locate the device. Note: A
The lens on your camera can become stuck in the open or closed position if one of the following conditions occur: The battery in your camera has died and needs to be recharged or replaced. Your charging cable has malfunctioned and needs to be replaced. Your battery needs to be replaced.
Choose your operating system below.
To connect your camera to your VCR, you must use the A/V cable provided with your camera. In addition, your VCR must be equipped with A/V Inputs. Using the A/V Cables provided, connect the appropriate end of the cable to the camera. Connect the yellow and the white ends of the A/V cable to
When you record a movie with your camera, the audio will cut out if you use the zoom. To prevent audio cut-out, do not use the zoom while recording a movie. If you need to use the zoom, use it before you begin recording. If you have an audio recording problem and it occurs when your are not
Important: If you have deleted a picture from your camera, you can not recover it. You can, however, protect pictures and prevent them from being deleted. Protecting a Specific Picture To protect a specific picture and prevent it from being deleted, follow these steps: Turn your camera on.
If pictures your camera takes are too bright when in Camera mode, the unit may need service. To determine if this is the case, follow these steps: Put the your camera into Auto mode by rotating the dial to Auto Mode. The word 'Auto' appears on the screen when you activate this mode. Face
The Processing message appears when the speed of the SD card in your camera is incompatible with the write speed of your camera. To confirm an SD card is incompatible, follow these steps. Turn off your camera, and then remove the SD card. Power on your camera. Take a picture with your
Shutter Speed refers to the amount of time it takes to open and close the shutter. It controls the amount of light which passes through the aperture before it reaches the image sensor. The faster the shutter speed, the amount of light is less. The slower the shutter speed, the amount of light
See prices, find online and local retailers near you.