How to assemble, install, and adjust The Movingstyle
Follow the guide below to assemble the stand and install the screen. The Movingstyle is designed for easy setup and mobility—learn how to adjust tilt, positions, and viewing angles using the supplied stand or kickstand for stable operation.
How to assemble and install The Movingstyle
Caution:
- The stand is heavy. Handle it carefully during assembly to avoid dropping it.
- Lift or carry the stand with caution to prevent injury or product damage.
- Certified to worldwide safety standards (IEC 62368-1), the stand meets international stability requirements. Its low-center-of-gravity design helps ensure safe use and provides reliable protection against tipping from any direction.
Follow the step-by-step guide below to assemble and install The Movingstyle.
Step 1. Unpack the box and take out the stand base and stand arm.
Step 2. Stand the base upright in the packing box for easier assembly.
Step 3. Place the stand arm onto the stand base.
Step 4. Secure the stand arm to the base using the four provided screws.
Step 5. Remove the assembled stand from the box and place it on a stable surface.
Step 6. Carefully lift the TV from the box and attach it to the stand.
Step 7. Ensure the slide button on the back of the TV is placed up to confirm the TV is securely attached.
Step 8. Connect the power cable TV and plug it in. The maximum cable length supported is 3.0m.
Step 9. Use the provided cable clamps to organize the cable neatly for a clean appearance.
You can also watch the video for step-by-step instructions on assembling The Movingstyle.
Note:
- Do not press, hit or apply excessive pressure to the screen when unboxing or assembling the TV to avoid damage.
- Do not stand or step on the stand base.
How to detach the TV from the stand and use it separately
Follow the steps below to remove the TV from the stand for portable use.
Step 1. Push the slide button down to release the TV from the stand.
Step 2. Gently lift the TV upward to detach it completely.
Step 3. Rotate the handle to the top position to safely carry the TV.
Step 4. To use the kickstand, unfold the handle from the back of the TV and adjust it to the desired angle.
Note:
- The kickstand supports landscape orientation only.
- Avoid touching or damaging the TV ports when using the product in detached mode.
- Handle the screen carefully when detaching it from the stand, as the TV screen is heavy.
How to adjust the TV screen
The tilt feature of The Movingstyle allows you to adjust the position and angle for optimal viewing comfort.
1. Tilt
Tilt the screen forward or backward by up to 35 degrees.
2. Swivel
Turn the screen left or right by up to 30 degrees.
3. Pivot
Rotate the display up to 93 degrees for vertical or horizontal viewing.
Note: Do not force the screen to rotate beyond a 90-degree angle.
4. Height
Adjust the stand height by up to 230 mm for a comfortable viewing position.
5. Handle rotation
Rotate the handle from 0 degree (landscape) to 90 degrees (portrait).
Note: Do not rotate the handle in the reverse direction.
6. Kickstand tilt
When using the kickstand, adjust the screen angle backward by up to 130 degrees.
Note: Avoid applying excessive force when adjusting the stand or kickstand.
Thank you for your feedback!
Please answer all questions.
Samsung Members
![]()
![]()
Call Us
Mon-Fri: 9am-6pm
RC01_Static Content