Are Samsung Dryers Energy Star Compliant?
The Energy Star program does not label clothes dryers because most dryers use similar amounts of energy. To reduce the amount of energy your clothes dryer uses, do the following: Use the moisture sensor option on your dryer which automatically shuts off the machine when the clothes are dry.
What Kinds Of Cleaners Should I Avoid Using On My Washer And Dryer?
You always want to avoid abrasive chemicals that can corrode or deteriorate metal and plastic. Here is a list of specific ingredients to avoid using on your Washer/Dryer: Methyl Palmitate Methyl Linolate Methyl Icosanoate Limonene Important: We do not tell you not to use a specific brand
Why Does The “Filter Light Flash”?
[Solution] The filter light on your dryer always flashes at start-up to remind you of cleaning the lint screen. You should always clean the lint screen before you start drying a new load of wash. You should always clean the lint screen before you start drying a new load of wash.
How Tall Are The Pedestals?
Samsung pedestals are 15 inches tall.
Where Are The Vent knockouts Located On My Dryer?
If you are going to side vent your dryer, the vent knockouts are located 7 from the rear of the cabinet and 4 from the bottom of the cabinet on either side. (Measurements Are to The Center Of The Knockout) The Bottom vent knockout is located 15 from the right side, 12 from the left side,
How Do I Mount The Drying Rack?
Mounting the Drying Rack Open the door. Mount Drying Rack in tumbler by engaging the two rear tails into the two recessed areas in the back wall. Place the front tail of Drying Rack on top of the lint filter. Place items to dry on the rack, giving enough space between them to give more air
Why Is My Dryer Drying Unevenly?
If your dryer isn’t drying evenly: Seams, pockets, and other similar heavy areas may not be completely dry when the rest of the load has reached the selected dryness level. This is normal. Select the Very Dry setting if desired. If one heavy item is dried with a lightweight load, such as one
The Clothes Are Wrinkled.
[Solution] To reduce wrinkling, please refer to the followings: The Samsung dryers have the “Wrinkle Prevent” cycle. The “Wrinkle Prevent” provides approximately 90 minutes of intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling. Press the “Wrinkle Prevent”
Dryer Does Not Power Off At The End Of A Cycle
Your dryer does not automatically power off at the end of a cycle. This is normal.
What Is Sensor Dry?
Sensor dry automatically senses the moisture in the load, and shuts the dryer off when the selected dryness level (very dry to damp dry) is reached.
The Display Is Showing An Hour Glass
If your dryer is showing an hour glass on the display, it is normal. The hour glass is there to let you know that there is a cycle in progress.
What Is The Exact Location Of The Dryer Vent?
See the illustration below for dryer vent location measurements. All measurements are from the outside edges of the cabinet to the center of the vent. Note: A clean vent system is critical for dryer performance. Samsung dryers have a very powerful blower motor and may dislodge residual lint
Setting Up (DV455 WPS)
In order to use Smart Control (WPS) you need to create an account at www.samsungsmartappliance.com. Turn on the unit Press and hold the start/pause and temp buttons till AP appears on the display. Turn the cycle selector knob to the left till UP appears on the display Press the start
How To Set Up Smart Control
Smart Control technology allows you to control your product through personal devices such as smart phone. It allows you to start and monitor your cycle, as well as notifying you upon cycle completion.
Setting Up (DV455 AP)
Before we get srtarted, make sure you have downloaded and installed the Samsung Laundry app. Connecting Smart Control via a local wireless network: Power On (Figures 1 and 2) Press and hold the Temp & Start/Pause buttons simultaneously for 5 seconds. After 5 seconds, the AP menu
How To Reverse The Dryer Door
To reverse the dryer door, perform the following steps: Open the dryer door and remove the 4 screws illustrated below. Remove the 2 screws on the door hinge as illustrated below. Remove the door by sliding the hinge/door assembly up, to disengage the door guide pin from the door
Dryer Troubleshooting: Will Not Start
If your Samsung Dryer will not start, try these tips to troubleshoot the issue.
Dryer Troubleshooting: Does Not Run
If your Samsung Dryer will not run, try these tips to troubleshoot the issue.
Dryer Troubleshooting: Wet Clothing at End of Cycle
If you find your clothes are still wet at the end of the cycle on your Samsung Dryer, try these tips to troubleshoot the issue.
Dryer Troubleshooting: Does Not Dry
If your Samsung Dryer seems to leave your clothes damp at the end of the drying cycle, follow these tips to troubleshoot the issue.
Dryer Troubleshooting: Excessive Noise
If your Samsung Dryer seems to be making more noise than normal while drying, try these tips to troubleshoot the issue.
Clothes Are Damp At The End Of A Dry Cycle
Important: If you are having issues on a Sensor Dry cycle and using dryer sheets, wipe off the sensor. It is located inside of the drum below the lint filter housing. A film or residue can build up on the sensor preventing it from sensing accurate moisture levels. Use a lint free cloth with a
Temperatures For Heat Settings
These are the approximate temperature settings for each heat cycle Extra Low: 100 - 110° (F) Low: 120° (F) Medium: 130° (F) High: 140° (F) Below are pictures of the various heat cycle selections
What Are The Ducting Requirements For My Samsung Dryer?
Warning: Do not exhaust dryer into any wall, ceiling, crawl space, or concealed space of a building, gas vent, or any other common duct or chimney. This could create a Fire Hazard from lint expelled by the dryer. Ducting Requirements: Use a 4-inch (10.2 cm) diameter rigid aluminum or rigid
Electric Dryers require a 240-Volt power supply (for more information about a 240-Volt outlet, see 240-Volt Outlet below): Dedicated 30 Ampere circuit breaker is required. 60 Hz AC approved electrical service is required. Note: A 208-Volt outlet is insufficient to power our electric