How Do I Install My DVD Player?
There is more than one way to install a DVD player. How you install your DVD player depends on the equipment you have and what you want to include in your video system with your DVD player. Although we can't cover all the possibilities in an FAQ, we can explain how to do a basic installation. So,
How Do I Find The Owner's Manual For My Product?
Getting Started When you buy a new Samsung product the owner's manual is one of the first things you want to look at. The owner's manual has a wealth of information about your new product and can help you with connections and set up. You Will Need: PC with internet access To locate and
My Remote Is Not Working, How Can I Determine If I Need A Replacement Remote?
If your remote control is not operating your Blu-ray player, try the following: Replace the batteries with new ones Reset the remote Test the remote Reset the Remote Remove the batteries and then hold down the POWER button on the remote for 30 seconds. Replace the batteries with new
How To Register Your Samsung Product
Getting Started Registering your Samsung product is easy and comes with many benefits. You will receive helpful tips, faster tech support and a chance to win free Samsung products. You Will Need A PC or Smart Device with Internet Access The Model Code and Serial number of your Samsung
How To Remove A Registered Product
Getting Started Registering your Samsung product is easy and comes with many benefits. In some cases you may have added a product to your account by mistake or entered the serial number incorrectly during registration. There are two ways a product can be registered to your account: Partial
How To Update A Partial Product Registration
Getting Started Registering your Samsung product is easy and comes with many benefits. In some cases you may have added a product to your account, but the registration is not complete. In order to receive the full benefit of registering your product you will need to complete the registration.
I Can See DVD Video but Not VHS Video.
If you have connected your combo unit to your television using S-video, Component, or HDMI, you will not get VHS video playback. These connections only support DVD playback. To enable VHS playback, you need to connect an additional set of RCA cables from AV out on your combo to AV or video in on
Can I Use My Samsung DVD Combo To Copy VHS Tapes To DVD?
If your Samsung DVD combo player's model code begins with DVD-VR, like the DVD-VR357, the unit will allow you to copy VHS tapes to DVDs and copy DVDs to VHS tapes. If your Samsung DVD combo player's model code begins with DVD-V, like the DVD-V9700, you will only be able to copy DVDs to VHS
How To Locate The Serial Number On Your DVD Player
This guide will help you locate the serial number on your DVD player.
Can I Change The Region Code On My DVD Player?
DVD region codes are a form of DRM (Digital Rights Management) designed to allow film studios to control where a film is released, when, and its pricing. DVD region codes are assigned based on where the player will be sold and are embedded in the players' firmware. Region codes cannot be
How Do I Clean The Lens Inside My DVD Player?
Cleaning the Outside: Use only a dry cloth to dust the exterior of the DVD Player. Important: Never spray any liquids on to the surface of the player. Cleaning the Lens Inside Your Player: Use only dry type DVD Lens Cleaners. A dry-type cleaner, which usually consists of a specially made DVD
Is There A Firmware Upgrade For My Older DVD Player?
Firmware is software that is embedded in the non-volatile memory of your DVD player that controls the functionality of the DVD player. Since Firmware varies by model and year, please locate the model number of your DVD player first and then follow the steps below to check if a Firmware upgrade is
I Get Snow / Static When Trying To Use My DVD-VCR Combo For The First Time.
The problem with snow and static is most likely caused by an incorrect RF output channel setting. The RF output channel on your combo unit is preset to Channel 3, a channel that most cable companies leave blank so people can hook up VCRs and DVD players to their TVs. However, some cable companies
No Image Is Displayed On The TV
An image from your DVD player may not appear on your TV for one of the following reasons: The DVD player is not connected correctly. The television is not set to the correct source. The video cable you used to connect the DVD player to the TV is defective. The video input jack on the TV is
Missing Parts Or Accessories
There are several ways to replace missing or defective parts and accessories for your Samsung DVD player. If your DVD player is under warranty, click the phone support button below to order a part by phone. If you like, you can also order a new part on line. To order a new part on line, click
If the DVD playback has a reddish haze, it is likely because the DVD player is connected to the TV using component cables but the player is not set for component output. To set the player for component output: Stop the player if it is playing a disc. Go to the menu. Select Setup. Select
What Is Causing The Problem, The Remote Or The Sensor?
To determine whether the remote or the sensor is causing your issue, you need a digital camera or a cell phone with a camera. You may also need a second person to assist you. To troubleshoot the remote and the sensor with a digital camera or a with cell phone with a camera, follow these steps: