Pictures and Videos
How To Change The Battery Type
Some cameras have a setting for alkaline or rechargeable batteries. If the camera is not set to the type of batteries you are using, the batteries may drain faster than they should. This video shows you how to properly set the battery type.
Explain About Whole Camera Mode & Each Default' Condition.
Camera Mode & each default' condition
How To Record & Play A Movie Clip?
Recording & Playing A Movie Clip.
To transfer images from your camera to your Windows 7 PC, follow these steps: Connect your camera to your PC using the USB cable. Turn your camera on, your camera will connect instantly to your PC. If a message appears on your camera shown in the illustration below, select the 'Computer'
Intelli Studio Did Not Pop Up
Intelli Studio is pre loaded on your camera. To install, all you need to do is plug your camera into your PC and power the camera on. Intelli Studio is Windows based and will not work on Macintosh computers. Intelli Studio will not pop up if one of the following conditions occur: Intelli
The Camera Does Not Connect to Your PC
A computer will not detect your camera under the following conditions: A computer's USB port has malfunctioned. A computer's operating system needs to be updated. A computer's operating system is not supported. Each of these conditions is addressed below. Checking Your Computer Prior to
Downloading Driver or Manual - DV150F Smart Camera
Watch this video to learn how to get the proper downloads for your device.
Cannot See LCD Screen Properly - DV150F Smart Camera
Follow along to learn how to view your LCD properly.
How To Transfer Pictures And Videos To Your Computer
Choose your operating system below.
How To Transfer Your Images Using Bluetooth
To transfer images using Bluetooth, follow the steps below: Power on your Camera. Tap the network menu icon on your cameras LCD screen. Tap the Bluetooth icon. Place the Bluetooth device you would like to connect into discovery mode. Tap Yes on your cameras LCD screen to search for
To transfer images from your camera to your Windows XP PC, follow these steps: Connect your camera to your PC using the USB cable. Turn your camera on, your camera will connect instantly to your PC. If a message appears on your camera shown in the illustration below, select the 'Computer'
For best results upgrade intelli-studio to 3.0 or higher.
Version 3.0 and Above
How To Share Your Photos Via Email
Follow the instructions below to learn how to send photos using Microsoft Outlook. Click on the share button. Note: If you do not have the share option, you are not running the latest version of Intelli-Studio. You need to have Intelli-Studio version 3.0 or higher to be able to use this
What Does The Shutter Speed Setting On My Camera Mean?
Shutter Speed refers to the amount of time it takes to open and close the shutter. It controls the amount of light which passes through the aperture before it reaches the image sensor. The faster the shutter speed, the amount of light is less. The slower the shutter speed, the amount of light
The following issues can cause a Write Protect error message: The Locked tab is set on the memory card. The Memory Card in the camera is defective. Try inserting another memory card. Unlock or Lock your SD card Find the switch on the left side of the card. See the illustration below.
Low Speed Card
If your camera displays a Low speed card, the memory card in your camera does not have enough performance to record. Insert another memory card or lower the resolution on your recordings.
The Camera's LCD Screen Does Not Turn On
If the LCD screen is blank or black when you have your camera in the Camera or Play mode, the camera may need service. To determine if this is the case, follow these steps: Press the Menu button to see if the LCD screen can display the OSD (On Screen Display). Set your camera to Play mode,