How Do I Get My LCD TV Out Of Shop Mode Or Store Demo Mode?
2007 - 2011 TVs If you have a 2007 Samsung LCD TV (LN-T series), or a 2008, 2009, 2010, or 2011 Samsung LCD TV (LNxxA or LNxxB, LNxxC, LNxxD) and your LCD TV keeps returning to the Dynamic mode every thirty minutes or everytime the TV is turned on. This could mean that your TV is set to Shop
What Is The MPEG Filter Setting?
The MPEG Noise Filter option (Menu > Picture > Picture Options > MPEG Noise Filter) will help eliminate any excess digital noise in a picture and help to reduce any flicker caused by this. This option is intended for digital video signals. There are five options for setting MPEG Noise
When Ever I Turn On My External Samsung Device My TV Also Turns On
Usually when an external device connected to the TV is turned on you will be turning on the TV and switching it to that source. For example: When you turn on your Blu-ray player you will also usually turn on the TV and switch the TV to that source to watch a movie. Because of this Samsung
TV Clicks When Powered On Or Off
It is normal for the TV to click once or twice before powering on or powering off. However, if your TV clicks one or more times and operates abnormally, most likely your TV is malfunctioning. Abnormal operation includes, but is not limited to, the following symptoms: Long time to power on
IR (Infrared) Sensor Locations
All Samsung TV's can be controlled by IR (infrared) signals. These signals which contain commands that cause your TV to turn on, turn off, change channels, etc. - are transmitted by your remote control and are received by the IR sensor on your TV. If your remote control is not pointing in
Performing A Factory Reset
Background Technicians resolve many TV service calls by entering the service menu and performing a Factory Reset. Now, all 2008 model televisions have a Factory Reset feature you can use to reset your TV to the factory settings without entering the service menu. Important: When you perform a
Resetting The Picture And Sound Mode To Default Settings
Most LCD TVs have three or four automatic picture modes, for example, Dynamic, Standard, Movie, etc. Each mode has its own, independent group of settings (color, tint, contrast, etc When you change a picture setting in a mode, you change the setting for that mode only. The change does not
When You Power The TV Off, The Standby LED Comes On.
The standby light, usually located in or near the Power button, goes ON when the power is turned OFF. It was designed this way to let you know the TV has in fact been powered off. Here is a good example of why it was designed this way. If you're through watching a DVD and turn the power off
Removing the Stand
Equipment To remove the stand, you need this equipment: Philips Head Screw Driver Soft Cloth Decoration Cover (image below) How to Remove the Stand To remove the stand, follow these steps: Lay the TV face down on the soft cloth. Using a Philips Head screwdriver (a magnetized tip
The Menu Is Not In English
If the menu is not in English, you probably can't read it. Follow the pictures that accompany each step below to get a better understanding of the instructions. How to Set the Menu Language to English To set the menu language to English, follow these steps: With the TV on, press [Menu], and
TV Appears To Turn Off By Itself
There are four cases in which your TV either turns itself off or appears to turn itself off. These cases are listed in the following table by category. Your TV Appears To Be Off If You Are Using The TV As A Computer Monitor If you are using the TV as a monitor and the Stand-by light only
Display: How Do I Adjust The Color On My TV? (LCD TV)
Generic instructions for adjusting the color settings on your TV. (LCD TV)
Setup: (LN**A - LN**C) How To Add Channels To Your LCD TV Through The Auto Program Function
How To Auto Program Your LCD TV Channels From A Cable Signal (2008-2010 LN**A - LN**C)
Setup: How To Label The Inputs On Your TV (2008-2010)
A step-by-step guide on labeling your inputs.
Connect: How To Connect A Cable Line To Your TV And Have The TV Memorize Channels (2008 - 2010)
Instructions on connecting an incoming direct (coax) cable from your cable provider to the TV and program in your channels
Feature: How To Use Game Mode On Your LCD TV (2008 - 2012 LNxxA - LNxxE)
A step-by-step guide on how to use the game mode feature.
Operation: How To Perform A Factory Reset On 2008 Through 2011 Model LCD TVs (LN**A ~ LN**D)
A step-by-step guide for returning your TV to the factory defaults (LN**A ~ LN**D)
Connect: How To Connect A DVD Player To My TV (LCD TV)
General Instruction on connecting a DVD player to your TV (LCD TV)
Display: How To Change The Aspect Ratio On Your LCD TV (2008 - 2012 LN**A ~ LN**E)
A step-by-step guide that will walk you through how to adjust the aspect ratio of your TV.
Setup: The Computer Image Is Cropped / Bigger / Cut Off On The TV Screen
A common complaint when connecting a computer to the TV is the screen size is not correct or that image is cropped. This is caused because the TV's scaling is set for standard HDMI input. To resolve these image issue you simply need to rename the input PC or PC DVI. Once renamed the TV will
What Is Gamma?
Gamma is a term used for the amount of electrical charge applied to the pixels of your screen. Having the gamma set to high will caused a washed out looking picture and the gamma set to low will cause you to have a very dark picture. Gamma and brightness are related but are not the same. A
Connect: How To Attach A Laptop Computer To Your TV
Instructions on how to connect a laptop to your TV using HDMI, HDMI-DVI, or VGA
Audio: How To Disable The TVs Internal Speakers (2011 - 2012 Model TVs)
Instructions on disabling the TVs internal speakers
Connect: How To Connect A High Definition Cable/ Satellite Box
Step-by step guide to connect your equipment and receive your HD signals.